活动 - FORD LDM Localization - Redmine

活动

从 2024-10-26 到 2024-11-04

2024-10-30

17:45 错误 #2966 (已关闭): Ford_SWER_0087_0047：转向反馈信号规格: !clipboard-202410301744-lpw4h.png!
测试覆盖盛炜朱
17:43 功能 #2965 (已关闭): Ford_SWER_0087_0046: 软启动电流控制: !clipboard-202410301743-yclm4.png!
软件无法实施盛炜朱
17:42 功能 #2964 (新建): Ford_SWER_0087_0045: PV 电源电压与输出电流(客户11月20日有更新,暂未解析): !clipboard-202410301741-tr7xj.png!
2024/11/5： Ford现场确认，软件仅需满足8V启动，6~9V按上图有降功率功能，9V以上无降额
!clipboard-202410311357-h... 盛炜朱
17:28 功能 #2963 (已关闭): Ford_SWER_0087_0044: MODE2 LIN反馈信息: 1、输出通道/LSSS通道故障
*BUCK通道开短路可以识别
*LSSS通道故障无法识别
2、输入通道故障
*需求删除
3、LDM过热故障
*可以满足,但是多少温度报警?
4、各通道负载单个LED故障
*C... 盛炜朱
17:26 功能 #2962 (已关闭): Ford_SWER_0087_0043: MODE2 输出状态需求: -40°C到Tamb 80°C的0.5m/s气流下，CH1-4输出无任何降额；110°C之前，灯光不关断
测试覆盖盛炜朱
17:26 功能 #2961 (已关闭): Ford_SWER_0087_0042: MODE2 TI Outage电压范围: 转向灯不输出工作，Outage<2V
转向灯输出工作，Outage>8V
滞后跟踪转向灯输入信号<75ms
Outage持续低电平为TI通道故障（N-1/开路/短路故障等）；
Outage持续高电平为TI Power Supp... 盛炜朱
17:25 功能 #2960 (已关闭): Ford_SWER_0087_0041: MODE2 FAN Feedback: 正常工作<1.72V
堵转3.32V-5V
测试覆盖盛炜朱
17:22 功能 #2959 (已关闭): Ford_SWER_0087_0040: MODE2 电流精度: 电流精度≤±8%
测试覆盖盛炜朱
17:22 功能 #2958 (已关闭): Ford_SWER_0087_0039: MODE2 冷启动延时: 各功能冷启动延时60ms
!clipboard-202410301721-j0wqg.png! 盛炜朱
17:19 功能 #2957 (已关闭): Ford_SWER_0087_0038: MODE2 FailSafe: LB及TI均需要支持FailSafe
不需配置Dataset
不需修改APP
测试覆盖盛炜朱
17:19 功能 #2956 (已关闭): Ford_SWER_0087_0037: MODE2 NTC配置: NTC：MURATA NCU18WB473F6SRB
!clipboard-202410301717-trtni.png!
NTC与输出通道的对应关系没有指定,按默认配置
NTC温度曲线按下表配置
!clipboard... 盛炜朱
17:15 功能 #2955 (已关闭): Ford_SWER_0087_0036：MODE2 BIN配置: 4颗1K电阻,没有明确通道对应关系,按默认配置
BIN电流配置按Ford_SWER_0087_0034来配置即可
BIN故障需要通过LIN通讯对外报出
配置Dataset即可,无需修改APP 盛炜朱
17:13 错误 #2954 (已关闭): Ford_SWER_0087_0035: MODE2 FAN配置: 风扇的动作条件是跟随LB/HB,但是当NTC故障时又要把风扇驱动起来,FS里没有这个功能,需要和客户谈盛炜朱
16:57 功能 #2953 (已解决): Ford_SWER_0085_0003: 数据CRC校验: 对于功能安全相关的变量都要数据结构化,并添加CRC数据校验功能,以防止数据在传递过程中出现的异常
CRC算法会在软件内部讨论后给出.
比如:
BUCK结构体有如下数据:结温,通道电流,输出通道1电压,输出通道2电压,CRC特... 盛炜朱
16:39 功能 #2917 (已解决): Ford_SWER_0020_0003：HB ramping trigger mode: 培源左
16:15 功能 #2917: Ford_SWER_0020_0003：HB ramping trigger mode: #2952 and #2826 玉洁金
10:53 功能 #2917 (已关闭): Ford_SWER_0020_0003：HB ramping trigger mode: 1、LIN BCM；
If the value of 'HB-Ramping_method_cfg' in the configuration is selected as BCM EEL LIN BCM,the fade spee... 玉洁金
16:12 功能 #2827: Ford_SWER_0020_0002：High Beam LDM standard ramping -‘HB_Ramping_method_cfg’: #2952 and #2826 玉洁金
16:09 功能 #2826: Ford_SWER_0020_0001：High Beam LDM standard ramping: ‘HB_Ramping_method_cfg’can be selected in the configuration（BCM EEL LIN BCM or LDM）refer to #2952 玉洁金
15:52 功能 #2952: Ford_SWER_0018_0004： High Beam (HB) BCM EEL LIN ramping: ‘HB_Ramping_method_cfg’can be selected in the configuration（BCM EEL LIN BCM or LDM）refer to #2540 玉洁金
15:50 功能 #2952 (已关闭): Ford_SWER_0018_0004： High Beam (HB) BCM EEL LIN ramping: If the value of 'HB-Ramping_method_cfg' in the configuration is selected as BCM EEL LIN BCM,the fade speed will be is... 玉洁金
15:43 功能 #2906 (已解决): Ford_SWER_0003_0005：Dataset中对于DRL/PO功能的防呆设定: 培源左
12:49 功能 #2906 (进行中): Ford_SWER_0003_0005：Dataset中对于DRL/PO功能的防呆设定: 培源左
15:27 功能 #2821: Ford_SWER_0018_0003：High Beam (HB) BCM EEL LIN Activation dataset-HB channel: 1、HB channel refer to #2643 玉洁金
15:19 功能 #2951 (已关闭): Ford_SWER_0087_0034：MODE2 SBL配置: 无SBL功能盛炜朱
15:19 功能 #2950 (已关闭): Ford_SWER_0087_0033：MODE2 DRL/PO功能: 触发方式:BCM LIN
DRL和LB Outage关系没有明确
DRL和TI的关系没有明确
DRL和FTP的关系没有明确
目前软件可以满足,只需配置Dataset,无需修改APP 盛炜朱
15:18 功能 #2949 (已关闭): Ford_SWER_0087_0032：MODE2 TURN功能: Input CHN3触发
Delay Time未提及
Dataset即可满足,无需修改APP 盛炜朱
15:18 功能 #2948 (已关闭): Ford_SWER_0087_0031：MODE2 HB功能: HB的配置没有明确需求
认为以Dataset默认即可,无需特殊配置,无需修改APP 盛炜朱
15:17 功能 #2947 (已关闭): Ford_SWER_0087_0030：MODE2 输出通道配置: Output CHN1: 电压-26.5V 电流-1.5A LED-8串3并
Output CHN2: 电压-23.2V 电流-0.85A LED-7串2并
Output CHN3: 电压-50V 电流-0.26A LED-15串... 盛炜朱
15:16 功能 #2946 (已关闭): Ford_SWER_0087_0029：MODE2 触发信号: Input CHN1:接VIN 触发LB
Input CHN2:接VIN
Input CHN3:接1.33Hz 50% 触发转向
Input CHN4:不接
LIN:触发HB及DRL
测试覆盖盛炜朱
15:13 功能 #2945 (已关闭): Ford_SWER_0087_0028：Standby 休眠后激活时间: ≤60ms 盛炜朱
15:12 功能 #2944 (已关闭): Ford_SWER_0087_0027：Standby 待机电流: <50mA 盛炜朱
15:12 功能 #2943 (已关闭): Ford_SWER_0087_0026：Standby 待机进入时间: ≤3s 盛炜朱
15:11 功能 #2942 (已关闭): Ford_SWER_0087_0025：Standby NTC配置: NTC 配置参数如下图
!clipboard-202410301511-fakad.png! 盛炜朱
15:09 功能 #2941 (已关闭): Ford_SWER_0087_0024：Standby BIN配置: 4颗1K电阻,没有明确通道对应关系,按默认配置
BIN电流配置按Ford_SWER_0087_0018来配置即可
配置Dataset即可,无需修改APP 盛炜朱
15:08 错误 #2940 (已关闭): Ford_SWER_0087_0023：Standby FAN配置: 风扇的动作条件是跟随LB/HB,但是当NTC故障时又要把风扇驱动起来,FS里没有这个功能,需要和客户谈盛炜朱
15:07 功能 #2939 (已关闭): Ford_SWER_0087_0022：Standby SBL配置: 无SBL功能盛炜朱
15:07 功能 #2938 (已关闭): Ford_SWER_0087_0021：Standby DRL/PO功能: 触发方式:BCM LIN
DRL和LB Outage关系没有明确
DRL和TI的关系没有明确
DRL和FTP的关系没有明确
目前软件可以满足,只需配置Dataset,无需修改APP 盛炜朱
15:06 功能 #2937 (已关闭): Ford_SWER_0087_0020：Standby TURN功能: 配置Input CHN3触发, 不接
Delay Time未提及
Dataset即可满足,无需修改APP 盛炜朱
15:06 功能 #2936 (已关闭): Ford_SWER_0087_0019：Standby HB功能: HB的配置没有明确需求
认为以Dataset默认即可,无需特殊配置,无需修改APP 盛炜朱
14:31 功能 #2784 (已解决): Ford_SWER_0040_0005：DRL / POS Activation Latency Times: 涛陆
14:30 功能 #2783 (已解决): Ford_SWER_0040_0004：Turn indicator Activation Latency Times: 涛陆
14:28 功能 #2782 (已解决): Ford_SWER_0040_0003：HB Activation Latency Times: 涛陆
14:25 功能 #2780 (已解决): Ford_SWER_0040_0001：LB Activation Latency Times: 涛陆
14:22 功能 #2935 (已关闭): Ford_SWER_0087_0018：Standby 输出通道配置: Output CHN1: 电压-26.5V 电流-1.5A LED-8串3并
Output CHN2: 电压-23.2V 电流-0.85A LED-7串2并
Output CHN3: 电压-50V 电流-0.26A LED-15串... 盛炜朱
14:17 功能 #2903 (已关闭): Ford_SWER_0025_0006:Feedback output Voltage for No Outage&Outage: BCM Requirements 娟高
14:13 功能 #2902 (已关闭): Ford_SWER_0025_0005:Outage Feedback Input Max Values: BCM Requirements 娟高
14:11 功能 #2901 (已关闭): Ford_SWER_0025_0004:Outage feedback conditions for resistor and circuit: BCM Requirements 娟高
14:10 功能 #2899 (已关闭): Ford_SWER_0025_0002:Turn Indicator Feedback time: BCM Requirements 娟高
13:56 功能 #2934 (已关闭): Ford_SWER_0087_0017：Standby 触发信号: Input CHN1:浮空
Input CHN2:接VIN
Input CHN3:浮空
Input CHN4:浮空
LIN:不接
测试覆盖盛炜朱
13:38 错误 #2933 (已关闭): Ford_SWER_0087_0016：MODE1 LIN反馈信息: 1、输出通道/LSSS通道故障
*BUCK通道开短路可以识别
*LSSS通道故障无法识别
-2、输入通道故障-
*需求删除
3、LDM过热故障
*可以满足,但是多少温度报警?
4、各通道负载单个LED故障
... 盛炜朱
13:09 功能 #2932 (已关闭): Ford_SWER_0087_0015：MODE1 输出状态需求: -40°C到Tamb 80°C的0.5m/s气流下，CH1-4输出无任何降额；110°C之前，灯光不关断
测试覆盖盛炜朱
13:08 功能 #2818: Ford_SWER_0018_0002： High Beam (HB) ramping accuracy and frequency: #2540 玉洁金
13:08 功能 #2931 (已关闭): Ford_SWER_0087_0014：MODE1 TI Outage电压范围: 转向灯不输出工作，Outage<2V
转向灯输出工作，Outage>8V
滞后跟踪转向灯输入信号<75ms
Outage持续低电平为TI通道故障（N-1/开路/短路故障等）；
Outage持续高电平为TI Power Supp... 盛炜朱
13:06 功能 #2930 (已关闭): Ford_SWER_0087_0013：MODE1 FAN Feedback: -H003：-
-正常工作<1.72V
堵转3.32V-5V-
测试覆盖
H004：
STD_LOW = Normal
STD_HIGH = Stall 盛炜朱
13:05 功能 #2929 (已关闭): Ford_SWER_0087_0012：MODE1 电流精度: 电流精度≤±8%
测试覆盖盛炜朱
13:04 功能 #2928 (已关闭): Ford_SWER_0087_0011：MODE1 冷启动延时: 各功能冷启动延时60ms
测试覆盖盛炜朱
13:02 功能 #2927 (已关闭): Ford_SWER_0087_0010：MODE1 FailSafe: LB及TI均需要支持FailSafe
不需配置Dataset
不需修改APP
测试覆盖盛炜朱
12:55 功能 #2905: Ford_SWER_0017_0002：LB Activation restriction: #2529 玉洁金
12:50 功能 #2905: Ford_SWER_0017_0002：LB Activation restriction: #2610 玉洁金
12:48 功能 #2926 (已关闭): Ford_SWER_0087_0009：MODE1 NTC配置: NTC型号:EPCOS B57351V5103H60
!clipboard-202410301246-vpeyv.png!
NTC与输出通道的对应关系没有指定,按默认配置
NTC温度曲线按下表配置
!clipboard... 盛炜朱
12:47 功能 #2806 (进行中): Ford_SWER_0016_0010:PWM output configuration(APP PWM Follow DRL2): 培源左
12:45 功能 #2925 (已关闭): Ford_SWER_0017_0003：LB additional channels: Any additional channels assigned to Low Beam should also activate based on this signal. 玉洁金
11:29 功能 #2924 (已关闭): Ford_SWER_0087_0008：MODE1 BIN配置: 4颗10K电阻,没有明确通道对应关系,按默认配置
BIN电流配置按Ford_SWER_0087_0002来配置即可
BIN故障需要通过LIN通讯对外报出
配置Dataset即可,无需修改APP 盛炜朱
11:22 功能 #2898 (已关闭): Ford_SWER_0025_0001:Turn Indicator Status Feedback Method: BCM Requirements 斌徐
11:21 错误 #2923 (已关闭): Ford_SWER_0087_0007：MODE1 FAN配置: 风扇的动作条件是跟随LB/HB,但是当NTC故障时又要把风扇驱动起来,FS里没有这个功能,需要和客户谈盛炜朱
11:17 功能 #2922 (已关闭): Ford_SWER_0087_0006：MODE1 SBL配置: 无SBL功能盛炜朱
11:16 功能 #2921 (已关闭): Ford_SWER_0087_0005：MODE1 DRL/PO功能: 触发方式:Input CHN4
PO触发占空比: 10% (Dataset中需要配置大于10%, 设置为15%较为合适),如果配置为10%按照FS_REQ0026_V1 DRL Control Strategy描述将点亮DRL
P... 盛炜朱
11:02 功能 #2920 (已关闭): Ford_SWER_0087_0004：MODE1 TURN功能: Input CHN3触发
Delay Time未提及
Dataset即可满足,无需修改APP 盛炜朱
11:01 功能 #2919 (已关闭): Ford_SWER_0087_0003：MODE1 HB功能: HB的配置没有明确需求
认为以Dataset默认即可,无需特殊配置,无需修改APP 盛炜朱
10:59 功能 #2664: Ford_SWER_0015_0007：Low Side Driver 1 and 2 usage Configuration(DRL2): 更新详述培源左
10:56 错误 #2918 (已关闭): Ford_SWER_0087_0002：MODE1 输出通道配置: Output CHN1: 电压-23.3V 电流-0.85A LED-7串2并
Output CHN2: 电压-26.5V 电流-1.5A LED-8串3并
Output CHN3: 电压-50V 电流-0.26A LED-15串... 盛炜朱
10:50 Bug #2512 (Bug-问题解决): 工厂模式在有app，boot和dataset的时候，刷app后，dataset会被冲掉变成空白: 涛陆
10:49 功能 #2916 (已关闭): Ford_SWER_0023_0009：Turn Indicator Activation(Turn Fault): 如果Turn指示灯因故障而关闭，DRL/PL行为应遵循DRL/PL请求。
(If the Turn indicator is deactivated due to fault, DRL behavior should follow ... 培源左
10:48 Bug #2511 (Bug-问题解决): 退出低功耗模式无法正常点灯: 涛陆
10:45 功能 #2915 (已关闭): Ford_SWER_0087_0001：MODE1 触发信号: Input CHN1:接VIN 触发LB
Input CHN2:接VIN
Input CHN3:接1.33Hz 50% 触发转向
Input CHN4:接200Hz±5Hz,10% 触发PO
LIN:触发HB
以上触发方... 盛炜朱
10:28 功能 #2819: Ford_SWER_0016_0016:PWM output configuration(Dataset PWM DRL1/2 Duty Cycle): 更新需求，PWM DRL1/2 Duty Cycle 需要可以配置。
(Update requirements, PWM DRL1/2 Duty Cycle needs to be configurable.) 培源左
10:28 功能 #2914 (已关闭): Ford_SYSR: HR_REQ0087 福特测试模式V003.8 DV PV test item_Proposed: 文档大小超过5M,需通过10.30陈捷邮件追溯或者SVN仓库:trunk/doc/9- hw_releated/硬件输入软件确认材料/DV测试/20241029 盛炜朱
09:50 功能 #2695: Ford_SWER_0010_0010：Channel 1 Failsafe Mode(BCM failsafe mode): 与客户确认需要删除培源左
09:28 功能 #2620: Ford_SWER_0010_0003：Channel 1 Failsafe Mode(LB Bin Sense): 应客户要求更改培源左
09:26 功能 #2619: Ford_SWER_0010_0002：Channel 1 Failsafe Mode(LB Thermal Derating): 应客户要求更改培源左
09:06 Bug #2908 (Bug-新建): dataset-RBIN电阻的bin_Param_CFG数据错误: 传鹏胡
08:57 Bug #2908: dataset-RBIN电阻的bin_Param_CFG数据错误: RBIN电阻Para的第一位bin0是高位还是低位
!clipboard-202410300857-nu45v.png!
传鹏胡

2024-10-29

18:49 功能 #2912 (已关闭): Ford_SWER_0084_0001:Software Flashing: 1.The LDM software and parameters shall be flashable via Lin bus acc. to ‘SWDL 00.06.15.002-006’.
2.LIN controller ... 希星柯
18:35 功能 #2911 (已关闭): Ford_SWER_0083_0001:LIN frames Data alignment: In some LIN frames the message is distributed over more than one byte. In every case the frame shall be read as the f... 希星柯
18:28 功能 #2910 (新建): Ford_SWER_0079_0002:Self-Test Command Frame Signal define: Self-Test Command Frame Signal Description is as follows:
!clipboard-202410291828-lmuhm.png!
Note:xx_EEL_LearnVfwd ... 希星柯
18:27 功能 #2909 (新建): Ford_SWER_0079_0001:Self Test command Frame: Software should have internal diagnostic function, and the instruction frame format is as follows:
!clipboard-202410... 希星柯
18:26 Bug #2908 (Bug-已关闭): dataset-RBIN电阻的bin_Param_CFG数据错误: RBIN电阻Para的第一位bin0是高位还是低位
!clipboard-202410291825-utswx.png!
传鹏胡
17:21 功能 #2803 (进行中): Ford_SWER_0016_0009:PWM output configuration(APP PWM Follow DRL1): 斌徐
11:03 功能 #2803 (已关闭): Ford_SWER_0016_0009:PWM output configuration(APP PWM Follow DRL1): 若软件读取到“PWMx_Function_Assign_cfg”为0x04，对应PWM通道关联DRL1功能，follow DRL1功能。若收到DRL指令时，对应PWM通道按照“PWM4_Target_Duty_Cycle_cfg”占空... 培源左
17:16 功能 #2907 (已关闭): Ford_SWER_0003_0006：app中DRL/PO触发信号的处理: 软件需要识别Dataset中传入的"Singal Source":
如果为INVALID,则软件无需初始化及使能DRL及PO的相关功能;
如果为INPUTCHN4,则软件需要在初始化IO口时配置其为捕获功能,并能正确识别其频率及占... 盛炜朱
16:57 功能 #2906 (已关闭): Ford_SWER_0003_0005：Dataset中对于DRL/PO功能的防呆设定: !clipboard-202410291654-dikkg.png!
当"Signal Source"配置为"InputCHN4"时:
需要开放"DRL_POS_Trigger_Dutycycle(%)"供选择Channel in... 盛炜朱
16:52 功能 #2905 (已关闭): Ford_SWER_0017_0002：LB Activation restriction: The output of channel 1 should always be applied to Main LB and no other function
玉洁金
16:23 功能 #2623: Ford_SWER_0010_0005：Channel 1 Failsafe Mode(N-1 Failure Detection): 更新详述培源左
16:16 功能 #2527: Ford_SYSR：FS_REQ0007_V1 TI Power Mode: tolerance should be double confirmed next meeting 斌徐
16:15 功能 #2631: Ford_SWER_0007_0001: 转向灯触发方式: 更新详述培源左
15:05 功能 #2631 (已解决): Ford_SWER_0007_0001: 转向灯触发方式: 培源左
15:53 功能 #2903 (已关闭): Ford_SWER_0025_0006:Feedback output Voltage for No Outage&Outage: If no TI outage detected, the feedback should be equal or more than 8V(Shall consider to meet the requirement while 9... 娟高
15:50 功能 #2902 (已关闭): Ford_SWER_0025_0005:Outage Feedback Input Max Values: Following BCM TI outage feedback input max values to be considered:
Input Voltage Range: 8 – 19 V
Input Current Ra... 娟高
15:48 功能 #2901 (已关闭): Ford_SWER_0025_0004:Outage feedback conditions for resistor and circuit: Note: BCM uses an active high input which has a 1.3K Ohm pull down resistor. The LDM module shall implement a high si... 娟高
15:44 功能 #2900 (已关闭): Ford_SWER_0025_0003:Turn Indicator Feedback signal for No Outage&Outage: TI outage detection report shall also occur via a hard wire back to BCM. Feedback signal will follow the “on/off” pat... 娟高
15:36 功能 #2899 (已关闭): Ford_SWER_0025_0002:Turn Indicator Feedback time: The software must be stable 60ms after BCM output Turn on. 娟高
15:26 功能 #2898 (已关闭): Ford_SWER_0025_0001:Turn Indicator Status Feedback Method: Under normal operating conditions, the LDM shall report Turn indicator status to the BCM by outputting the received ... 娟高
15:26 功能 #2897 (已关闭): Ford_SWER_0033_0001：Cornering Activation: The activation/deactivation of cornering light shall be triggered by BCM LIN command ‘ *Cornering_cmd* ’
signal def... 玉洁金
15:24 功能 #2896 (已关闭): Ford_SWER_0001_0006：电源电压迟滞: 电源电压的恢复需要有迟滞区间,具体数值需要参考硬件PV实验波形输入盛炜朱
15:20 功能 #2615: Ford_SWER_0001_0003：电源电压降功率波形: 2024/10/29 与福特点检会议，硬件工程师（贾日晶）核实，待硬件确认，明天给出反馈斌徐
15:17 功能 #2615: Ford_SWER_0001_0003：电源电压降功率波形: 2024/10/29 与福特点检会议，硬件工程师（贾日晶）核实： 6V降功率到30%，硬件可以实现斌徐
13:06 功能 #2615 (进行中): Ford_SWER_0001_0003：电源电压降功率波形: 涛陆
15:17 功能 #2895 (已关闭): Ford_SWER_0031_0001：Licoln Lit Star Activation: BCM LIN中的‘Position_Park_Left/Right_Cmd’对Licoln Lit Star进行触发。
稚媛黄
15:13 Bug #2856: dataset问题: 此Bug将在AC版本上更新培源左
13:38 Bug #2856 (Bug-已关闭): dataset问题: 当DRL/L的Signal Source配置为INVALID时，DRL_POS_Triger_Dutycycle和parkpos_intensity的配置没有拉灰，还可以配置数值传鹏胡
15:11 功能 #2872 (已解决): Ford_SWER_0030_0001：DRL Response to Flash-To-Pass Activation For Dataset: 培源左
14:19 功能 #2872 (已关闭): Ford_SWER_0030_0001：DRL Response to Flash-To-Pass Activation For Dataset: ‘DRL_ON_FTP_cfg’ parameter definition:
• 0x00: FTP has no impact on DRL
• 0x01: DRL should fade from ‘DRL_Intensity... 涛陆
15:11 功能 #2878 (已解决): Ford_SWER_0028_0001：DRL Response to Low Beam outage for dataset: 培源左
14:29 功能 #2878 (已关闭): Ford_SWER_0028_0001：DRL Response to Low Beam outage for dataset: “DRL_LB_Outage_cfg” will determine if DRL is affected by LB outage(0x00、0x01、0x02)
Need to select the value of “DRL_... 玉洁金
15:11 功能 #2865 (已解决): Ford_SWER_0026_0002：DRL value for dataset: 培源左
13:58 功能 #2865 (已关闭): Ford_SWER_0026_0002：DRL value for dataset: The value of “DRL_POS_TriggerDC_cfg” needs to be selected in the Dataset
“DRL_POS_TriggerDC_cfg”value range between ... 玉洁金
15:10 功能 #2825 (已解决): Ford_SWER_0024_0001: Turn Indicator Delay(Dataset Cfg): 培源左
11:46 功能 #2825 (已关闭): Ford_SWER_0024_0001: Turn Indicator Delay(Dataset Cfg): Dataset中需要能配置“TI_delay_time_Cfg”，并生成对应的数据。
(The Dataset must be able to configure TI_delay_time_Cfg and generate cor... 培源左
15:09 功能 #2875 (已解决): Ford_SWER_0023_0005：Turn Indicator Activation( Dataset “DRL_Combined_TI_cfg”& "DRL_TI_Control_cfg"): 培源左
14:24 功能 #2875 (已关闭): Ford_SWER_0023_0005：Turn Indicator Activation( Dataset “DRL_Combined_TI_cfg”& "DRL_TI_Control_cfg"): Dataset中“DRL_Combined_TI_cfg”= 0x01时，“DRL_TI_Control_cfg”配置项更新为以下选项：
(When DRL_Combined_TI_cfg = 0x01 in the Dataset... 培源左
15:09 功能 #2841 (已解决): Ford_SWER_0022_0001：High Beam EEL Front Fog Activation Reaction for App: 培源左
12:48 功能 #2841 (已关闭): Ford_SWER_0022_0001：High Beam EEL Front Fog Activation Reaction for App: 1、if App read the value of ‘HB_combined_Front_fog_cfg’= 0，activate/deactivate HB as specified；Fog is not related to H... 玉洁金
15:08 功能 #2827 (已解决): Ford_SWER_0020_0002：High Beam LDM standard ramping -‘HB_Ramping_method_cfg’: 培源左
11:52 功能 #2827 (已关闭): Ford_SWER_0020_0002：High Beam LDM standard ramping -‘HB_Ramping_method_cfg’: ‘HB_Ramping_method_cfg’can be selected in the configuration（BCM EEL LIN BCM or LDM）
 0x00: follow BCM LIN activatio... 玉洁金
15:07 功能 #2826 (已解决): Ford_SWER_0020_0001：High Beam LDM standard ramping: 培源左
11:48 功能 #2826 (已关闭): Ford_SWER_0020_0001：High Beam LDM standard ramping: If the value of 'HB_Ramping_method_cfg' in the configuration is selected as LDM, the fade speed will be issued by 'LD... 玉洁金
15:06 功能 #2819 (已解决): Ford_SWER_0016_0016:PWM output configuration(Dataset PWM DRL1/2 Duty Cycle): 培源左
11:22 功能 #2819 (已关闭): Ford_SWER_0016_0016:PWM output configuration(Dataset PWM DRL1/2 Duty Cycle): Dataset中若“PWMx_Function_Assign_cfg”配置为0x00/0x04/0x05，则对应PWM通道的“PWMx_Target_Duty_Cycle_cfg”不可被配置，并生成默认值0x00。
(If PWMx... 培源左
15:05 功能 #2630 (已解决): Ford_SWER_0006_0001: DRL/PO触发方式: 培源左
15:02 功能 #2893 (已解决): Ford_SWER_0075_0003：HCM LIN node Configuration: HCM requirements 斌徐
15:00 功能 #2893 (已关闭): Ford_SWER_0075_0003：HCM LIN node Configuration: The HCM will also support LIN node configuration on each of its private LIN0 and LIN1 connections to the LDM. 斌徐
15:02 功能 #2894 (已关闭): Ford_SWER_0032_0001：Front Fog Activation: BCM LIN中的Front_Fog_Request控制前雾灯的开/关
“Front_Fog_Request”信号定义：
0x00：停用前雾灯
0x01：激活前雾灯稚媛黄
15:01 功能 #2891 (已解决): Ford_SWER_0075_0002：Left and Right LDM Node configured togther: 斌徐
14:50 功能 #2891 (已关闭): Ford_SWER_0075_0002：Left and Right LDM Node configured togther: The LF_EEL and RF_EEL will be configured together (Both get the same data) and the EX_EEL (FCM) is configured indepen... 斌徐
15:00 功能 #2888 (已解决): Ford_SWER_0075_0001：BCM supprot 2 different data configuration method: BCM requirements 斌徐
14:48 功能 #2888 (已关闭): Ford_SWER_0075_0001：BCM supprot 2 different data configuration method: BCM will support configuration of the LIN nodes using the established methods for configuration that are already in p... 斌徐
14:58 功能 #2892 (已关闭): Ford_SWER_0023_0008：Turn Indicator Activation(Two-part DRL cannot be used when DRL is combined with TI): 当“DRL_Combined_TI_cfg”为0x01时，Two-part DRL不能被启用。
(When "DRL_Combined_TI_cfg" is 0x01, the Two-part DRL cannot be enab... 培源左
14:50 功能 #2890 (已关闭): Ford_SWER_0034_0001：Left side light activation mode: 左侧sm灯的激活/停用由 BCM LIN 命令 “Position_Park_Left_Cmd”触发，该命令控制左侧节点的sm灯，其中0x00为停用sm灯，0x01为激活sm灯。
The activation/deactivatio... 槐杨
14:48 功能 #2889 (已关闭): Ford_SWER_0078_0001：Part Number Report: Software shall report Part Number via LIN.
Left LDM ID is 0x12.Right LDM ID is 0x1A.
Data frame composition：
!... 稚媛黄
14:45 功能 #2804: Ford_SWER_0018_0001： High Beam (HB) BCM EEL LIN activate condition: 更改主题涛陆
11:04 功能 #2804 (已关闭): Ford_SWER_0018_0001： High Beam (HB) BCM EEL LIN activate condition: 1、High beam (of any type) shall only activate if *IGN is in Run or Start* ;
2、Issue *HB activation command*:LIN comm... 玉洁金
14:43 功能 #2532 (已拒绝): Ford_SYSR：FS_REQ0012_V1 DRL Failsafe Mode: 涛陆
14:42 功能 #2621: Ford_SWER_0010_0004：Channel 1 Failsafe Mode(Channel Open/Short Detection): 统一格式涛陆
14:42 功能 #2886 (已关闭): Ford_SWER_0023_0007：Turn Indicator Activation(Copy TI behavior alternating between ‘DRL_intensity_cfg’ and ‘ParkPos_Intensity_cfg’): 当软件读到“DRL_Combined_TI_cfg”= 0x01时，若“DRL_TI_Control_cfg ”配置为0x01时，则TI点亮时DRL渐变到PL亮度，TI熄灭时，再渐亮为DRL亮度。
(When the softwar... 培源左
14:42 功能 #2620: Ford_SWER_0010_0003：Channel 1 Failsafe Mode(LB Bin Sense): 统一格式涛陆
14:41 功能 #2619: Ford_SWER_0010_0002：Channel 1 Failsafe Mode(LB Thermal Derating): 统一格式涛陆
14:41 功能 #2617: Ford_SWER_0010_0001：Channel 1 Failsafe Mode(LB Light Output): 统一格式涛陆
14:41 功能 #2678: Ford_SWER_0009_0002：Channel 1 output Assignment(APP Channel 1 combine LB): 统一格式涛陆
14:40 功能 #2677: Ford_SWER_0009_0001：Channel 1 output Assignment(Dataset Channel 1 combine LB): 统一格式涛陆
14:39 功能 #2885 (已关闭): Ford_SWER_0078_0002： Unused bytes handling: All unused bytes must be set to 0 (NULL). 稚媛黄
14:38 功能 #2884 (已关闭): Ford_SWER_0023_0006：Turn Indicator Activation(Copy TI behavior alternating between DRL intensity and off): 当软件读到“DRL_Combined_TI_cfg”= 0x01时，若“DRL_TI_Control_cfg ”配置为0x00时，则TI和DRL交替闪烁。
(When the software reads "DRL_Combined... 培源左
14:37 功能 #2882 (已关闭): Ford_SWER_0069_0004：The node that should be set to the 0x00: 以下几个节点应被设置为0x00，包括：IntVfStat，ExtVfStat，Fade_Active，LowBeam_Outage_Status，Headlamp_Failure，LED_Temp_Not_Idle
The foll... 槐杨
14:36 功能 #2881 (已解决): Ford_SWER_0074_0003: LDM Data Configuration Requirement For BCM: BCM requirements, close directly 斌徐
14:35 功能 #2881 (已关闭): Ford_SWER_0074_0003: LDM Data Configuration Requirement For BCM: The BCM methodology utilizes a data space which contains the multiple variant configurations for LIN Nodes.
If the... 斌徐
14:36 功能 #2791 (进行中): Ford_SWER_0008_0003: 左右识别的task调度及策略: LIN报警存在问题涛陆
10:38 功能 #2791 (已关闭): Ford_SWER_0008_0003: 左右识别的task调度及策略: 左右识别任务只在模块初始化时进行.
当判断到有效的位置信息时,软件需要存入NVM中;
当无法判断有效位置信息时,软件需要从NVM中获取之前存入的位置信息;
当无法判断有效位置信息且NVM中没有存入过有效位置信息,则使用"左"侧作... 盛炜朱
14:30 功能 #2880 (已关闭): Ford_SWER_0069_0003：LowBeam_Outage_Status feedback that the output of the LDM is faulty: 该信号应反馈LDM的输出故障，详情请参考
This signal shall report the LDM output fault, detail please refer to LDM failure Mode&Diagnost... 槐杨
14:29 功能 #2879 (已关闭): Ford_SWER_0074_0003: LDM Configuration Matching test: -The first 2 Bytes (Data0 and Data1) of ConfigIndex = 0 are reserved for BCM to LDM Configuration Matching test.-
... 斌徐
14:26 功能 #2877 (已关闭): Ford_SWER_0074_0002: LDM Data Configuration LIN data format: !clipboard-202410291428-lorlm.png!
Table 41: BCM Front EEL Configuration Frame Definition 斌徐
14:26 功能 #2876 (已关闭): Ford_SWER_0082_0003:LDM Diag service ID: One ID of each Node Lighting Module is allocated, but undefined and is for Supplier use. These IDs are listed in the ... 希星柯
14:24 功能 #2874 (已关闭): Ford_SWER_0030_0002：DRL Response to Flash-To-Pass Activation For App: option1：DRL_ON_FTP_cfg == 0x00
FPT has noimpact on DRL.
option2：DRL_ON_FTP_cfg <> 0x00
If the DRL is active, and f... 涛陆
14:20 功能 #2873 (已关闭): Ford_SWER_0082_0002:LDM Service and Diagnostics Report Frame define: The following section illustrates a possible node response frame modelled after the Part Number Reporting Frame to al... 希星柯
14:19 功能 #2871 (已关闭): Ford_SWER_0074_0001: LDM Data Configuration LIN frame format: !clipboard-202410291426-qokys.png!
Table 40: BCM Front EEL Configuration Frame
斌徐
14:18 功能 #2870 (已关闭): Ford_SWER_0082_0001:LDM Diagnostic service requirement: For supplier use in development of the LDM and for analysis of warranty service return parts,the supplier should impl... 希星柯
14:12 功能 #2777 (已解决): Ford_SWER_0008_0002: 左右识别AD转换: 涛陆
14:12 功能 #2777: Ford_SWER_0008_0002: 左右识别AD转换: 本模块采用了12bit采样，应该除以4095 涛陆
10:20 功能 #2777 (已关闭): Ford_SWER_0008_0002: 左右识别AD转换: AC = 5 * AD / 4095 盛炜朱
14:12 功能 #2869 (已关闭): Ford_SWER_0023_0004：Turn Indicator Activation( “DRL_Combined_TI_cfg”): 软件读取到参数“DRL_Combined_TI_cfg”设置为1时，转动灯的激活也可以开启DRL，具体的表现以“DRL_TI_Control_cfg”配置项为准。
(When the software reads that the ... 培源左
14:10 功能 #2776 (已解决): Ford_SWER_0008_0001: 左右识别的电压范围: 涛陆
10:18 功能 #2776 (已关闭): Ford_SWER_0008_0001: 左右识别的电压范围: 软件通过读取"L/R Selection"的电压进行"左右识别"判断:
- 当"L/R Selection"电压≥3V时, 即识别为"接电源",视作右侧
- 当"L/R Selection"电压≤1V时, 即识别为"接地",视作左... 盛炜朱
14:10 功能 #2632 (进行中): Ford_SWER_0007_0002: 转向灯触发信号规格: 这个是BCM的TURN硬线频率及占空比，转给测试涛陆
14:08 功能 #2628 (已解决): Ford_SWER_0005_0001：输入通道2供电模式: 涛陆
14:07 功能 #2614 (已解决): Ford_SWER_0003_0004：Dataset中对于DRL/PO功能的配置: 涛陆
14:07 功能 #2612 (已解决): Ford_SWER_0003_0003：输入通道3的功能: 涛陆
14:07 功能 #2611 (已解决): Ford_SWER_0003_0002：输入通道2的功能: 涛陆
14:07 功能 #2610 (已解决): Ford_SWER_0003_0001：输入通道1的功能: 涛陆
14:04 功能 #2868 (已关闭): Ford_SWER_0027_0001：DRL EEL LIN command Table for App: DRL request shall take a higher priority than Position request
|DRL_Rqst |Position_Park_Left_Cmd |Position_Park_Rig... 玉洁金
14:01 功能 #2867 (已关闭): Ford_SWER_0069_0002：LDM_Load provide extended Load Fault Identification: 节点反馈对应功能的故障，对应关系如下所示：
(xx_EEL_)Load0: Static Bending light
(xx_EEL_)Load1: LB
(xx_EEL_)Load2: HB
(xx_EEL_)Load3: ... 槐杨
13:58 功能 #2864 (已关闭): fORD_SWER_0073_0013: LDM Data Configuration Respond Frame Information: |DLPL_LIN_19_007 |Note 1: The node can detect that it has received all ConfigData when the ConfigIndex is zero the s... 斌徐
13:56 功能 #2862 (已关闭): Ford_SWER_0023_0003：Turn Indicator Activation(“Turn_signal_Light_Cmd“ no impact): LIN接收信号中，“Turn_signal_Light_Cmd”信号会为其他功能提供转向灯使能信息。此信号对确定转向指示灯功能的实际状态没有影响。
(The‘Turn_signal_Light_Cmd’provides inform... 培源左
13:53 功能 #2861 (已关闭): Ford_SWER_0073_0012: LDM Data Configuration should respond “Not configured” immediately: |DLPL_LIN_19_005 |Once a node detects that the subnet as switched to Configuration Mode then it shall immediately st... 斌徐
13:49 功能 #2860 (已关闭): Ford_SWER_0065_0001：Information: 该表格是所有LIN通讯报文的总览，具体所有ID的作用和说明，请参见上述的几张图表。
This table provides an overview of all LIN communication messages, as show... 槐杨
13:49 功能 #2859 (已关闭): Ford_SWER_0073_0011: LDM Data Configuration Start and Over time mechanism: |DLPL_LIN_19_004 |A node shall infer that Configuration Mode has started when it first receives any of these signals... 斌徐
13:41 功能 #2858 (已关闭): Ford_SWER_0026_0001：DRL Control Mode for dataset: The trigger source for DRL/PO function needs to be set in the Dataset
1、BCM LIN
2、BCM ‘L/RF_DRL_LAMP_Ckt’direct w... 玉洁金
13:39 功能 #2618 (已解决): Ford_SWER_0001_0005：电源电压采样过滤时间: 涛陆
13:39 功能 #2618 (进行中): Ford_SWER_0001_0005：电源电压采样过滤时间: 涛陆
13:39 功能 #2616 (已解决): Ford_SWER_0001_0004：电源电压降功率平滑过渡: 涛陆
13:39 功能 #2616 (进行中): Ford_SWER_0001_0004：电源电压降功率平滑过渡: 涛陆
13:38 功能 #2638 (已解决): Ford_SWER_0011_0006：Turn Indicator Failsafe Mode（Active Load Fault Reporting via LIN）: 斌徐
13:37 功能 #2843 (已解决): Ford_SWER_0073_0006：LDM personalization configuration information: 斌徐
12:50 功能 #2843 (已关闭): Ford_SWER_0073_0006：LDM personalization configuration information: Reserved, no Software requirements 斌徐
12:49 功能 #2843 (已关闭): Ford_SWER_0073_0006：LDM personalization configuration information: If the information can change, it is deemed to be personalization information and must be transmitted to the node us... 斌徐
13:36 功能 #2855 (已关闭): Ford_SWER_0068_0002：Exterior Lighting Functional Description: 外部照明功能说明的表格参考上述截图Table 30
槐杨
13:33 功能 #2703 (已解决): Ford_SWER_0086_0001: output status when MEC = 0: 涛陆
13:33 功能 #2703 (进行中): Ford_SWER_0086_0001: output status when MEC = 0: 涛陆
13:32 功能 #2789 (已解决): Ford_SWER_0016_0007:PWM output configuration(APP PWM Follow HB): 涛陆
10:38 功能 #2789 (进行中): Ford_SWER_0016_0007:PWM output configuration(APP PWM Follow HB): 培源左
10:37 功能 #2789 (已关闭): Ford_SWER_0016_0007:PWM output configuration(APP PWM Follow HB): 若软件读取到“PWMx_Function_Assign_cfg”为0x02，则对应PWM通道关联HB功能，当收到HB功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycle_cfg”占空比。
(I... 培源左
13:32 功能 #2854 (已关闭): Ford_SWER_0068_0001：The main lighting signal: 驱动 LDM 中 Position 和 Headlamp 逻辑的主要信号为：
Position_Park_Left_Cmd
Position_Park_Right_Cmd
Headelamps_Low_Beams_Out
He... 槐杨
13:31 功能 #2853 (已关闭): Ford_SWER_0073_0010: LDM Data Configuration detailed information: The LDM supplier is responsible for providing full multiplexing information showing the location of each parameter wi... 斌徐
13:31 功能 #2788 (已解决): Ford_SWER_0016_0006:PWM output configuration(APP PWM Follow LB): 涛陆
13:30 功能 #2788 (进行中): Ford_SWER_0016_0006:PWM output configuration(APP PWM Follow LB): 涛陆
10:36 功能 #2788 (已关闭): Ford_SWER_0016_0006:PWM output configuration(APP PWM Follow LB): 若软件读取到“PWMx_Function_Assign_cfg”为0x01，则对应PWM通道关联LB功能，当收到LB功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycle_cfg”占空比。
(I... 培源左
13:29 功能 #2852 (已关闭): Ford_SWER_0077_0001：Compare data of BCM broadcast frames with Cfg_match: LDM模块会对BCM广播的配置数据进行检查，当Cfg_Match与BCM广播的值不匹配时，则LDM没有为它所安装的车辆配置，会显示“未配置”(APINFO4->1）稚媛黄
13:29 功能 #2818 (已解决): Ford_SWER_0018_0002： High Beam (HB) ramping accuracy and frequency: 涛陆
13:28 功能 #2818 (进行中): Ford_SWER_0018_0002： High Beam (HB) ramping accuracy and frequency: 涛陆
11:21 功能 #2818 (已关闭): Ford_SWER_0018_0002： High Beam (HB) ramping accuracy and frequency: Accuracy：between 0% and 100%
PWM Frequency：200HZ
For specific methods, please refer to FS_REQ0020_V1 High Beam LDM ... 玉洁金
13:28 功能 #2821 (已解决): Ford_SWER_0018_0003：High Beam (HB) BCM EEL LIN Activation dataset-HB channel: 涛陆
13:28 功能 #2821 (进行中): Ford_SWER_0018_0003：High Beam (HB) BCM EEL LIN Activation dataset-HB channel: 涛陆
11:30 功能 #2821 (已关闭): Ford_SWER_0018_0003：High Beam (HB) BCM EEL LIN Activation dataset-HB channel: HB channel: The APP reads the generated data from the Dataset. If Channel2/3/4_usage_cfg is 0x02,The corresponding ch... 玉洁金
13:27 功能 #2828 (已解决): Ford_SWER_0021_0001：High Beam EEL LIN Flash-to-Pass Activation: 涛陆
13:26 功能 #2828 (进行中): Ford_SWER_0021_0001：High Beam EEL LIN Flash-to-Pass Activation: 涛陆
12:23 功能 #2828 (已关闭): Ford_SWER_0021_0001：High Beam EEL LIN Flash-to-Pass Activation: 1、the LIN signal ‘FTP_Status’ transitions from ‘0’ to ‘1’, the high beam output(s) shall *activate immediately* ；
2、... 玉洁金
13:24 功能 #2829 (已解决): Ford_SWER_0021_0002 ：FTP priority: 涛陆
13:20 功能 #2829 (进行中): Ford_SWER_0021_0002 ：FTP priority: 涛陆
12:24 功能 #2829 (已关闭): Ford_SWER_0021_0002 ：FTP priority: FTP status shall always take priority over normal high beam activation 玉洁金
13:23 功能 #2850 (已关闭): Ford_SWER_0073_0009: LDM Data Configuration LIN data frame bit map: DLPL_LIN_19_002 – Configuration Data Mapping
The table below explicitly lists how the multiplexed Config informati... 斌徐
13:22 功能 #2849 (已关闭): Ford_SWER_0023_0002：Turn Indicator Activation(Turn signal working voltage judgment): 当转向电源（L/RF_Turn_Lamp_Ckt）等于或高于7V时转向灯点亮，低于7V时转向灯熄灭，转向灯熄灭时，转向灯电源需要等于或高于7.5V才能恢复到点亮状态。
(When the power supply (L/RF_Tur... 培源左
13:13 功能 #2848 (进行中): Ford_SWER_0070_0003：How the Vehicle Operation Load Sequencing command is applied: 车辆运行负载排序命令可以通过 BCM 的诊断命令激活单个灯负载,该消息由 5 字节的数据组成，每个 Lighting Module 1 字节。高位将启用该 Module 的负载切换。低阶 7 位将分别与软件中的单个负载相关联。当主动命... 槐杨
13:13 功能 #2847 (已解决): Ford_SWER_0073_0008: LDM data configuration interaction mechanism: 涛陆
13:08 功能 #2847 (已关闭): Ford_SWER_0073_0008: LDM data configuration interaction mechanism: A LIN Node will "know" that it has completely received all the ConfigData when it sees ConfigIndex = 0 a second time.... 斌徐
13:09 功能 #2846 (已解决): Ford_SWER_0023_0001：Turn Indicator Activation(the definition of the operational state of the Turn Indicator): 涛陆
13:08 功能 #2846 (进行中): Ford_SWER_0023_0001：Turn Indicator Activation(the definition of the operational state of the Turn Indicator): 涛陆
13:06 功能 #2846 (已关闭): Ford_SWER_0023_0001：Turn Indicator Activation(the definition of the operational state of the Turn Indicator): 软件需要能抓取BCM转向电源端（L/RF_Turn_Lamp_Ckt）的电压电平，改变转向指示灯工作状态。
(The software needs to be able to grab the voltage level of th... 培源左
13:02 功能 #2845 (进行中): Ford_SWER_0070_0002：The Vehicle Operation Load Sequencing command and functional correspondence: 车辆运行负载排序命令和功能对应关系如下所示：
EX_LDM_Load_0_Rqst: Static Bending Light (All applicable light sources)
EX_LDM_Load_1_Rqst: ... 槐杨
13:02 功能 #2722 (已解决): Ford_SWER_0086_0006: read of MEC: 涛陆
12:59 功能 #2722 (进行中): Ford_SWER_0086_0006: read of MEC: 涛陆
12:53 功能 #2844 (已关闭): Ford_SWER_0073_0007: LDM Data Configuration LIN frame protocol: To avoid limiting the amount of configuration information to what can fit into one LIN frame, we have chosen to use a... 斌徐
12:49 功能 #2842 (已关闭): Ford_SWER_0035_0003：Static Bending Light Activation For App: SBL will be activated based on steering wheel angle provided by the Signal ‘SteAngle’ and vehicle speed provided by ‘... 涛陆
12:46 功能 #2840 (已关闭): Ford_SWER_0073_0005：LDM Configuration tirgger method: Configuration information is limited to data that is downloaded when the LIN node is first installed and never changes. 斌徐
12:42 功能 #2839 (已关闭): Ford_SWER_0035_0002：Static Bending Light Activation From LIN signal: ‘SteAngle’ signal definition:
• Signal Size: 15 Bit
• Resolution: 0.1 degrees
• Raw Data Values: 0-32767
• Logica... 涛陆
12:41 功能 #2838 (已关闭): Ford_SWER_0072_0001：Node Lighting Module Configuration: 支持整车报文配置稚媛黄
12:40 功能 #2837 (已关闭): Ford_SWER_0035_0001：Static Bending Light Activation For Dataset: Dataset:
‘SBL_ Trigger_SteAngle_Thershold_cfg’ parameter definition:
• Range: 0 to 255Deg
• Resolution: 1Deg.
‘... 涛陆
12:38 功能 #2832 (进行中): Ford_SWER_0024_0002: Turn Indicator Delay(TI Delay Time): 培源左
12:28 功能 #2832 (已关闭): Ford_SWER_0024_0002: Turn Indicator Delay(TI Delay Time): 软件需要能识别Dataset配置项“TI_delay_time_Cfg”生成数据。在收到转向灯信号时，按照配置时间延时触发。
(The software must be able to identify data generated... 培源左
12:37 功能 #2836 (已关闭): Ford_SWER_0073_0004：LDM Configuration data transimission method: To support a relatively large amount of configuration info (inclination/intrusion sensor) a multiplex message is used... 斌徐
12:34 功能 #2835 (反馈): Ford_SWER_0070_0001：VO_Load_Seq 0x07: 该帧数据大小为8字节，类型为命令帧，ID为0x07,采样为80ms，该命令消息用于单独驱动每个负载，LDM需考虑左右两侧，具体需检测安装的位置。
The data size of the frame is 8 bytes, the ... 槐杨
12:33 功能 #2834 (已关闭): Ford_SWER_0036_0002：DRL Welcome/Farewell For App: option1:DRL_Embrace_Intensity_cfg == 0%
No animation
option2:DRL_Embrace_Intensity_cfg <> 0%
When the LDM is trigg... 涛陆
12:30 功能 #2833 (已关闭): Ford_SWER_0073_0004：LDM Configuration data storage mechanism: The LIN node must retain this configuration information in EEPROM (or equivalent) 斌徐
12:26 功能 #2831 (已关闭): Ford_SWER_0073_0002：LDM Configuration LIN message ID: Lin controller message ID (0x05) is used to LDM Data configuration
The nodes respond IDs are listed as below:
0x1... 斌徐
12:24 功能 #2830 (已关闭): Ford_SWER_0073_0001：LDM Data Configuration definition: The function message (Message ID refer to: Ford_SWER_0073_0002) used to LDM configuration can not used to download ap... 斌徐
11:45 功能 #2824 (已关闭): Ford_SWER_0036_0001：DRL Welcome/Farewell For Dataset: Dataset:
‘DRL_Embrace_Intensity_cfg’ parameterdefinition:
• Range: 0 – 100%
• Resolution: 1%
•
‘DRL_Curve_Durati... 涛陆
11:43 功能 #2823 (已关闭): Ford_SWER_0037_0002：PWM channel Welcome/Farewell For App: App:
If the ‘PWMx_WF_Target_Dutycycle_cfg’ is set to 0%, it means PWM channel shall not involved in welcome/farewell... 涛陆
11:41 功能 #2822 (已关闭): Ford_SWER_0037_0001：PWM channel Welcome/Farewell For Dataset: Dataset:
‘PWMx_WF_Target_Dutycycle_cfg’ parameter definition:
• Range: 0 – 100%
• Resolution: 1%
•
‘PWMx_WF_Fade... 涛陆
11:30 功能 #2820 (已关闭): Ford_SWER_0069_0001：BCM EEL LDM Node Status Report Frame: 节点状态报告帧，该帧大小为8字节，类型为节点状态信息，采样率小于250ms，标识符参考状态框架中的报头ID表，其中左侧ID为0x16,右侧ID为0x24
The node status report frame, the size ... 槐杨
11:20 功能 #2817 (新建): Ford_SWER_0080_0003:Self-Test“Cycle all” 不报故障: LDM在执行自主测试Cycle all命令期间，如果电源有问题，LDM应该不报故障
During the execution of the Self testing cycle all command ,no fault shall... 希星柯
11:14 功能 #2816 (已关闭): Ford_SWER_0038_0002：Farewell Fade Activation Signals: W/F shall only occur when:
• ‘Ignition status’ <> Run/Start
• ‘Headlight_Status’ = Off/Auto
• ‘L/RF_Low_Beam_Ckt’=... 涛陆
11:14 功能 #2815 (已关闭): Ford_SWER_0016_0015:PWM output configuration(APP PWM Follow Static Bending light): 若软件读取到“PWMx_Function_Assign_cfg”为0x10，则对应PWM通道关联Static Bending light功能，当收到Static Bending light功能指令时，PWM输出应立即从0%激活到对应的... 培源左
11:13 功能 #2814 (新建): Ford_SWER_0080_0002:Self-Test “CycleAll” 指令LDM响应内容: Software shall illuminate executes the CycleAll instruction with the following sequence:
1. Channel 1 and correspond... 希星柯
11:13 功能 #2813 (已关闭): Ford_SWER_0016_0014:PWM output configuration(APP PWM Follow Side Marker): 若软件读取到“PWMx_Function_Assign_cfg”为0x09，则对应PWM通道关联Side Marker功能，当收到Side Marker功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_... 培源左
11:13 功能 #2812 (已关闭): Ford_SWER_0038_0001：Welcome Fade Activation Signals: W/F shall only occur when:
• ‘Ignition status’ <> Run/Start
• ‘Headlight_Status’ = Off/Auto
• ‘Headlamp_Low_Beams_... 涛陆
11:13 功能 #2811 (已关闭): Ford_SWER_0071_0007：APINFO0 bit map: |APINFO4 |APINFO3 |APINFO2 |APINFO1 |APINFO0 |Meaning|
|0 |0 |0 |0 |unused ... 斌徐
11:11 功能 #2810 (已关闭): Ford_SWER_0016_0013:PWM output configuration(APP PWM Follow Cornering light): 若软件读取到“PWMx_Function_Assign_cfg”为0x08，对应PWM通道关联Cornering light功能，当收到Cornering light功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Targe... 培源左
11:10 功能 #2809 (已关闭): Ford_SWER_0067_0002：Description of the second frame of data: BCM的第二帧，提供 LDM 使用的命令和状态信息。
在0x01报文中，各功能的数据组成和说明参考上述两张截图所示。
The second frame of the BCM, which provides the command ... 槐杨
11:09 功能 #2808 (已关闭): Ford_SWER_0016_0012:PWM output configuration(APP PWM Follow Front Fog): 若软件读取到“PWMx_Function_Assign_cfg”为0x07，则对应PWM通道关联Front Fog功能，当收到Front Fog功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycl... 培源左
11:08 功能 #2807 (已关闭): Ford_SWER_0016_0011:PWM output configuration(APP PWM Follow Licoln Lit Star): 若软件读取到“PWMx_Function_Assign_cfg”为0x06，则对应PWM通道关联Licoln Lit Star功能，当收到Licoln Lit Star功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Targ... 培源左
11:05 功能 #2806 (已关闭): Ford_SWER_0016_0010:PWM output configuration(APP PWM Follow DRL2): 若软件读取到“PWMx_Function_Assign_cfg”为0x05，对应PWM通道关联DRL2功能，follow DRL2功能。若收到DRL指令时，对应PWM通道按照“PWM4_Target_Duty_Cycle_cfg”占空... 培源左
11:04 功能 #2805 (已关闭): Ford_SWER_0067_0001：the second frame from the BCM 0x01: BCM的第二帧，提供 LDM 使用的命令和状态信息。
该帧的数据长度为8字节，ID为0x01,类型为命令帧，采样时间为80ms
The second frame of the BCM, which provides the com... 槐杨
11:00 功能 #2802 (新建): Ford_SWER_0080_0001:Self-Test “CycleAll” Action time: LDM在接收到自主测试 "cycle all"请求后，LDM需要在3S内执行指令并完成响应
After receiving the Self test "cycle all" request, LDM needs to execut... 希星柯
10:59 功能 #2801 (已关闭): Ford_SWER_0008_0005: 左右识别的数据调用存储: 左右识别功能需要在NVM中存入以下信息:
LDM的安装位置
LDM LIN ID (默认值详见REQ0069或者LDF)
LDM LIN NAD (默认值详见LDF)
左右识别功能需要在NVM中提取以下信息:
对应侧LDM ... 盛炜朱
10:57 功能 #2800 (已关闭): Ford_SWER_0071_0006：APINFO0 should be set to zero in all reported status: Even though APINFO0 is designated as unused, it should be set to zero in all reported status bytes 斌徐
10:55 功能 #2799 (已关闭): Ford_SWER_0066_0002：Description of the first frame of data: 在0x00报文中，各功能的数据组成和说明参考上述截图所示
WFSuperstate 在欢迎/告别过渡到 RunStart 时提供了一个小的延迟，以允许环境光 - 自动灯在位置灯中平滑地拾取功能；
Ignition_Status，F... 槐杨
10:54 功能 #2798 (已关闭): Ford_SWER_0071_0005：APINFOx should follow Ford Standards: Even though APINFO4 is called out by J2602, it is included in this list because Ford expects that all nodes continue ... 斌徐
10:50 功能 #2797 (已关闭): Ford_SWER_0071_0004：All nodes are required to report Error Status: All nodes are required to report the Ford Standard J2602 Error Handling Extension
o Ford Standard J2602 Error Handl... 斌徐
10:46 功能 #2796 (已关闭): Ford_SWER_0071_0003：Errors are reported once in LIN communicaition: All these faults are "one-shot." In other words, they are only reported once and then they are cleared and not report... 斌徐
10:45 功能 #2795 (已关闭): Ford_SWER_0039_0002：Fading detail requirement: If fade pwm is over 5%,fading shall be achieved by a PWM which shall provide a non-linear cubic ramp.
If fade pwm i... 涛陆
10:43 功能 #2794 (已关闭): Ford_SWER_0039_0001：Fading general requirement: Fuction fading below：
| |Channel 1 |Channel 2 |Channel 3 |Channel 4 |LSD1&2|
|Fade-in capability from 0% onwards ... 涛陆
10:41 功能 #2793 (已关闭): Ford_SWER_0008_0004: 左右识别的故障报警: 左右识别如果故障需要按照"LDM failure Mode&Diagnostic report"报警
!clipboard-202410291645-ky6ap.png!
盛炜朱
10:40 功能 #2792 (已关闭): Ford_SWER_0016_0008:PWM output configuration(APP PWM Follow TI): 若软件读取到“PWMx_Function_Assign_cfg”为0x03，则对应PWM通道关联TI/Hazard功能，当收到TI/Hazard功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycl... 培源左
10:37 功能 #2790 (已关闭): Ford_SWER_0071_0002：Error Status meanings in first byte for LIN communication: |ERR2 |ERR1 |ERR0 |Meaning|
|0 |0 |0 |No fault detected|
|0 |0 |1 |Reset|
|0 |1 |0 |Reserved|
|0 |1 |1 |Reserved|... 斌徐
10:35 功能 #2787 (已关闭): Ford_SWER_0017_0001：LB Activation conditions: The voltage level of the LB supply terminal of the BCM (‘L/RF_Low_Beam_Ckt’) must be used
- When "voltage" >= 7V, L... 玉洁金
10:31 功能 #2786 (已关闭): Ford_SWER_0016_0005:PWM output configuration(APP PWM unused): 若软件读取到“PWMx_Function_Assign_cfg”为0x00，则对应PWM通道不会被启用。
(If the value of PWMx_Function_Assign_cfg is 0x00, the correspo... 培源左
10:29 功能 #2785 (已关闭): Ford_SWER_0071_0001：Data format for first byte of LIN communication: SAE J2602 Status Byte
In J2602, the first byte transmitted by any node is the LIN Status Byte. It has this format:
... 斌徐
10:28 功能 #2784 (已关闭): Ford_SWER_0040_0005：DRL / POS Activation Latency Times: If LDM in shut down mode (no power) ,software receive DRL / POS signal,DRL / POS indicator should be active in 60ms.
... 涛陆
10:27 功能 #2779 (进行中): Ford_SWER_0016_0004:PWM output configuration(APP PWM Duty Cycle): 培源左
10:24 功能 #2779 (已关闭): Ford_SWER_0016_0004:PWM output configuration(APP PWM Duty Cycle): 软件需要能识别Dataset生成的数据中4个PWM通道对应配置项“PWMx_Target_Duty_Cycle_cfg”的值。
(The software must be able to identify the value of ... 培源左
10:27 功能 #2783 (已关闭): Ford_SWER_0040_0004：Turn indicator Activation Latency Times: If LDM in shut down mode (no power) ,software receive Turn indicator signal,Turn indicator should be active in 60ms.
... 涛陆
10:26 功能 #2778 (进行中): Ford_SWER_0016_0003:PWM output configuration(APP PWM Function): 培源左
10:22 功能 #2778 (已关闭): Ford_SWER_0016_0003:PWM output configuration(APP PWM Function): Dataset中可以配置四个PWM通道绑定的触发功能，并配置触发时输出的PWM百分比。
(The software must be able to identify the values of PWMx_Function_Assig... 培源左
10:26 功能 #2782 (已关闭): Ford_SWER_0040_0003：HB Activation Latency Times: If LDM in shut down mode (no power) ,software receive HB signal,HB should be active in 60ms.
If LDM is waked up,soft... 涛陆
10:25 功能 #2781 (已关闭): Ford_SWER_0040_0002：SuppLight Activation Latency Times: If LDM in shut down mode (no power), software receive SuppLight signal, SuppLight (PWM output) should be active in 60... 涛陆
10:25 功能 #2774 (已解决): Ford_SWER_0016_0002:PWM output configuration(Dataset PWM Duty Cycle): 培源左
10:11 功能 #2774 (已关闭): Ford_SWER_0016_0002:PWM output configuration(Dataset PWM Duty Cycle): Dataset 应该可以分别配置4个PWM通道的占空比。
(The Dataset should be able to configure duty cycles for each of the four PWM channels.... 培源左
10:24 功能 #2773 (已解决): Ford_SWER_0016_0001:PWM output configuration(Dataset PWM Function): 培源左
10:02 功能 #2773 (已关闭): Ford_SWER_0016_0001:PWM output configuration(Dataset PWM Function): Dataset 应该可以将4个PWM对应的“PWMx_Function_Assign_cfg”配置为一下选项并生成相应数据。
(The Dataset should be able to set PWMx_Function_Assi... 培源左
10:24 功能 #2780 (已关闭): Ford_SWER_0040_0001：LB Activation Latency Times: If LDM is powered off ,software receive LB signal,LB should be active in 60ms.
If LDM is powered on ,software receiv... 涛陆
10:14 功能 #2775 (已关闭): Ford_SWER_0041_0001：Channel output intensity Smooth Fading: The first 5% of the fade in and last 5% of the fade out will need to be longer to appear smooth.
Multiplying the no... 涛陆
09:56 功能 #2772 (已关闭): Ford_SWER_0066_0001：the first frame from the BCM 0x00: BCM 中的第一帧，该帧大小为8字节，ID为0x00，类型为命令帧，采样时间为80ms。
The first frame in the BCM, the frame size is 8 bytes, the ID is 0x00, ... 槐杨
09:49 功能 #2670 (已解决): Ford_SWER_0015_0011：Low Side Driver 1 and 2 usage Configuration(LSD Duty Cycle): 培源左
09:49 功能 #2771 (已解决): Ford_SWER_0015_0012：Low Side Driver 1 and 2 usage Configuration(IGN Read): 培源左
09:49 功能 #2771 (已关闭): Ford_SWER_0015_0012：Low Side Driver 1 and 2 usage Configuration(IGN Read): APP需要可以读取IGN信号，并判断其状态，是否为RUN，START状态。
(The APP needs to be able to read IGN signals and determine whether they are i... 培源左
09:43 功能 #2669 (已解决): Ford_SWER_0015_0010：Low Side Driver 1 and 2 usage Configuration(HB/FTP Base IGN): 培源左
09:43 功能 #2668 (进行中): Ford_SWER_0015_0009：Low Side Driver 1 and 2 usage Configuration(DRL2 clash): 培源左
09:43 功能 #2666 (进行中): Ford_SWER_0015_0008：Low Side Driver 1 and 2 usage Configuration(SBL): 培源左
09:43 功能 #2664 (已解决): Ford_SWER_0015_0007：Low Side Driver 1 and 2 usage Configuration(DRL2): 培源左
09:42 功能 #2663 (已解决): Ford_SWER_0015_0006：Low Side Driver 1 and 2 usage Configuration(HB): 培源左
09:42 功能 #2662 (已解决): Ford_SWER_0015_0005：Low Side Driver 1 and 2 usage Configuration(LB): 培源左
09:41 功能 #2661 (已解决): Ford_SWER_0015_0004：Low Side Driver 1 and 2 usage Configuration(Not used): 培源左
09:40 功能 #2658 (已解决): Ford_SWER_0015_0003：Low Side Driver 1 and 2 usage Configuration(Dataset LSD cycle): 培源左
09:39 功能 #2656 (已解决): Ford_SWER_0015_0002：Low Side Driver 1 and 2 usage Configuration(Dataset DRL2 clash): 培源左
09:39 功能 #2655 (已解决): Ford_SWER_0015_0001：Low Side Driver 1 and 2 usage Configuration(Dataset_Lsd_usage): 培源左
09:36 功能 #2770 (进行中): Ford_SWER_0014_0008：Low Side Driver 1 and 2 Channel Configuration(APP Clash): 培源左
09:36 功能 #2770 (已关闭): Ford_SWER_0014_0008：Low Side Driver 1 and 2 Channel Configuration(APP Clash): 软件中两个LSD不能连接同一个通道。(Two LSDS in the software cannot connect to the same channel.) 培源左
09:33 功能 #2654 (进行中): Ford_SWER_0014_0006：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel4): 培源左
09:32 功能 #2653 (进行中): Ford_SWER_0014_0005：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel3): 培源左
09:32 功能 #2652 (进行中): Ford_SWER_0014_0004：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel2): 培源左
09:32 功能 #2648 (进行中): Ford_SWER_0014_0003：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel1): 培源左
09:31 功能 #2769 (已解决): Ford_SWER_0014_0007：Low Side Driver 1 and 2 Channel Configuration(Dataset Clash): 培源左
09:31 功能 #2769 (已关闭): Ford_SWER_0014_0007：Low Side Driver 1 and 2 Channel Configuration(Dataset Clash): Dataset中“LSD1/2_channel_assignment_cfg”配置项，两个LSD不被允许配置为同一通道。若配置为同一通道，最后一步操作将会撤回，并报错提醒。
(In the Dataset, the LSD1/2_c... 培源左
09:30 功能 #2768 (已关闭): Ford_SWER_0064_0002：After each command frame, the BCM processes the node frames: 在每个命令帧之后，BCM 将处理一个节点帧，循环遍历 LIN 节点，包含以下三个响应节点：左节点，右节点和尾灯节点以及无响应周期。
After each command frame, the BCM will process a n... 槐杨
09:28 功能 #2767 (反馈): Ford_SWER_0085_0002: Software test -SSR: Please refer to "Ford_Software_Safety_Requirement_V005.xlsx" which will be sent via email, due to the attachment size... 盛炜朱
09:27 功能 #2766 (反馈): Ford_SWER_0085_0001: APP-SSR: Please refer to "Ford_Software_Safety_Requirement_V005.xlsx" which will be sent via email, due to the attachment size... 盛炜朱
09:27 功能 #2647 (进行中): Ford_SWER_0014_0002：Low Side Driver 1 and 2 Channel Configuration(LSD Not used): 培源左
09:26 功能 #2765 (已关闭): Ford_SWER_0064_0001：The master node sends it in a loop: BCM 在两个功能命令帧之间交替，命令帧分为Master Functional 1和Master Functional 2两个主节点。
The BCM alternates between two function command ... 槐杨
09:26 功能 #2646 (已解决): Ford_SWER_0014_0001：Low Side Driver 1 and 2 Channel Configuration(Dataset Cfg): 培源左
05:33 功能 #2764 (已关闭): Ford_SWER_0042_0002：Bin Source Select For App: Software should get the parameter of Channel_Bin_Source and get the corresponding AD value. 涛陆
05:24 功能 #2763 (已关闭): Ford_SWER_0042_0001：Bin Source Select For Dataset: parameter ‘BINx_Chy_Param_cfg’
Dataset:
‘BINx_Chy_Param_cfg’ definition:
• 0x00: BIN_Channel1
• 0x01: BIN_Channel... 涛陆
05:19 功能 #2762 (已关闭): Ford_SWER_0043_0002：Bin Resistor Sample For App: App should sample the RBIN value and convert to the resistor.
Option1:the BIN resistor is in one of the BIN range
T... 涛陆
05:01 功能 #2761 (已关闭): Ford_SWER_0043_0001：Bin Class Current Setting For Dataset: BIN current can be set for BIN0 to BIN7 of each channel in the configuration parameter file, the current range should... 涛陆

2024-10-28

20:23 功能 #2760 (已关闭): Ford_SWER_0044_0002： FAN Functional self-test when power on for app: App:
The software needs to determine whether a fan self-test is required and the duration of the self-test based on ... 涛陆
20:20 功能 #2759 (已关闭): Ford_SWER_0044_0001： FAN Functional self-test when power on for dataset: Dataset:
‘FanRunTime_OnPwr_cfg’ definition:
• 0x00: 0s
• 0x01: 20s
• 0x02: 40s
• 0x03: 60s 涛陆
20:13 功能 #2758 (已关闭): Ford_SWER_0045_0003：NTC Temperatur Triggle Fan For Dataset: ‘Fan_Activation_Temp_cfg’ definition:
• Range: 50℃ to 100℃
• Resolution: 5℃ 涛陆
20:12 功能 #2757 (已关闭): Ford_SWER_0045_0002：NTC Source Triggle Fan For Dataset: Dataset:
If ‘FAN_Activation_Trigger_cfg’ = 0x02 which means FAN will be activated when the temperature is more than ... 涛陆
20:11 功能 #2756 (已关闭): Ford_SWER_0045_0001：Activation of the Fan For Dataset: Dataset:
The activation of FAN can be configured by the parameter ‘FAN_Activation_Trigger_cfg’.
• 0x00: No fan
• 0... 涛陆
19:59 功能 #2755 (已关闭): Ford_SWER_0046_0002：Fan Failure Detection Of App: the software will sample the feedback line(C16) of the fan.
|State of the Fan Feedback Line |AD Range |Operati... 涛陆
19:50 功能 #2754 (已关闭): Ford_SWER_0046_0001：Fan Failure Detection Of Dataset: Dataset has‘Fan_Outage_Detect_cfg’to determine either perform full stall/outage detection or not.
‘Fan_Outage_Detect... 涛陆
19:18 功能 #2753 (已关闭): Ford_SWER_0047_0001：LED Thermal Derating Peak Current morn than 150mA: If the current derating is more than 150mA,the LDM shall control the LED junction temperature by controlling the curr... 涛陆
19:09 功能 #2752 (已关闭): Ford_SWER_0048_0002：Output Channel Thermal Monitoring NTC Source Select For App: App：
Reduce or not reduce power by obtaining information from 'Channelx_NTC_Source_cfg' and combining it with the co... 涛陆
19:03 功能 #2751 (已关闭): Ford_SWER_0048_0001：Output Channel Thermal Monitoring NTC Source Select For Dataset: Dataset：
‘Channelx_NTC_Source_cfg’ definition:
• 0x00: NOT USED
• 0x01: NTC1
• 0x02: NTC2
• 0x03: NTC3
• 0x04: ... 涛陆
18:56 功能 #2750 (已关闭): Ford_SWER_0049_0002：Output Thermal Derating Curve For App: APP:
1.软件初始化时候计算每两个降功率点之间的斜率
2.任务循环里面滤波并计算当前温度值，判断当前温度处于哪一档区间，用该档的斜率计算目标降功率的值
3.当前输出降功率值和目标降功率的值不一致的时候做缓慢变化
4.如果降... 涛陆
18:53 功能 #2749 (已关闭): Ford_SWER_0049_0001：Output Thermal Derating Curve Dataset Configure: Dataset：
NTC derating temperature range and resolution setting:
‘CHx_NTC_TempDerate1_cfg’: should always be -40℃ an... 涛陆
18:40 功能 #2748 (已关闭): Ford_SYER_0050_0006：LDM Internal Thermal Derating Hysteresis: Derated functions shall recover to performance of the previous range with a 5°C hysteresis.
模块温度降功率回到上一个区间的状态需要增加5℃的回滞涛陆
18:38 功能 #2747 (已关闭): Ford_SYER_0050_0005：LDM Internal Thermal Derating for SBL: If LDM Internal temperature is over 125℃，SBL target Derating value should be 20%.
If LDM Internal temperature is ove... 涛陆
18:36 功能 #2746 (已关闭): Ford_SYER_0050_0004：LDM Internal Thermal Derating for DRL/PL: If LDM Internal temperature is over 135℃，DRL/PL target Derating value should be 20%.
If LDM Internal temperature is ... 涛陆
18:32 功能 #2744 (已关闭): Ford_SYER_0050_0003：LDM Internal Thermal Derating for Turn Indicator: If LDM Internal temperature is over 145℃，Turn target Derating value should be 20%.
If LDM Internal temperature is un... 涛陆
18:29 功能 #2743 (已关闭): Ford_SYER_0050_0002：LDM Internal Thermal Derating for HB: If LDM Internal temperature is over 125℃，HB target Derating value should be 20%.
If LDM Internal temperature is over... 涛陆
18:25 功能 #2573 (已解决): Ford_SYSR：FS_REQ0053_V2 General LED Failure Detection: 槐杨
18:24 功能 #2742 (已关闭): Ford_SYER_0050_0001：LDM Internal Thermal Derating for Foreground LB: start derating at 135℃ 100% to 145℃ 20% (linear) 涛陆
18:22 功能 #2741 (已关闭): Ford_SWER_0062_0005：LDM diagnostic with test command——Write MEC: 发送诊断写数据：（NAD）04 2E F1 A0 MEC
反馈显示写入成功或失败槐杨
18:19 功能 #2740 (已关闭): Ford_SWER_0062_0004：LDM diagnostic with test command——Read Daataset 数据: 发送诊断数据：（NAD）03 22 C0 C1
反馈显示Dataset数据信息：如通道配置，LSD配置，FAN配置，NTC配置等，具体信息见附件槐杨
18:16 功能 #2739 (已关闭): Ford_SWER_0062_0003：LDM diagnostic with test command——Read SW Version: 发送诊断数据：（NAD）03 22 C0 C0
SW Version 显示软件版本信息：如程序版本，Dataset版本，项目版本等，具体信息见附件槐杨
18:13 功能 #2738 (已关闭): Ford_SWER_0062_0002：LDM diagnostic with test command——Read EDF2: 发送诊断数据：（NAD）03 22 C0 C3
EDF2 显示实时信息：如诊断帧信息，降功率数据，Lifetime，和最近5次的故障信息等，具体信息见附件槐杨
18:09 功能 #2737 (已关闭): Ford_SWER_0062_0001：LDM diagnostic with test command——Read EDF1: 发送诊断数据：（NAD）03 22 C0 C2
EDF1 显示实时信息：如通道电流，电源电压，升压电压，通道Vf， Rbin电阻范围，内部和外部温度等，具体信息见附件槐杨
17:46 功能 #2736 (已关闭): Ford_SWER_0061_0005：Failure Recover strategy—— Power Reset: 本章所述的所有LDM故障应在以下情况下恢复：
ldm上电复位
All the LDM failure above in this chapter shall recovery when:
LDM power on re... 槐杨
17:45 功能 #2735 (已关闭): Ford_SWER_0061_0004：Failure Recover strategy—— LIN Rcv: 本章所述的所有LDM故障应在以下情况下恢复：
ldm在500毫秒内接收3个有效的LIN信号
All the LDM failure above in this chapter shall recovery when:
... 槐杨
17:44 功能 #2734 (已关闭): Ford_SWER_0061_0003：Failure Recover strategy——Buck Flt Rcv: 本章所述的所有LDM故障应在以下情况下恢复：
buck通道短/开路故障恢复，自恢复
All the LDM failure above in this chapter shall recovery when:
Bu... 槐杨
17:42 功能 #2733 (已关闭): Ford_SWER_0061_0002：Failure Recover strategy——RBIN/NTC Rcv: RBIN不可自恢复，需要重新上电；
NTC可以自恢复。槐杨
17:41 功能 #2732 (已关闭): Ford_SWER_0061_0001：Failure Recover strategy——LED Rcv: 本章所述的所有LDM故障应在以下情况下恢复：
•led负载恢复正常工作
All the LDM failure above in this chapter shall recovery when:
LED load re... 槐杨
17:35 功能 #2731 (已关闭): Ford_SWER_006x_0004：LB hardwire activate lost failure - LB Hardwire ON + Headlamp_Low_Beams_Out Off: 目前采用LB硬线作为激活信号，当出现意外的硬线丢失时，LDM应在LB硬线激活状态与LIN信号“Headlamp_Low_Beams_Out”ON状态不匹配时报告LB硬线输入故障报告，且只有当“Headlamp_Low_Beams_... 槐杨
17:33 功能 #2730 (已关闭): Ford_SWER_006x_0003：LB hardwire inactive and Headlamp_Low_Beams_Out ,LB shall OFF: 目前采用LB硬线作为激活信号，当出现意外的硬线丢失时，LDM应在LB硬线激活状态与LIN信号“Headlamp_Low_Beams_Out”ON状态不匹配时报告LB硬线输入故障报告，且只有当“Headlamp_Low_Beams_... 槐杨
17:27 功能 #2729 (已关闭): Ford_SWER_0063_0001：LDF: 在BCM LIN（10417波特率）上，LDM应使用“LDF BCM_G2_LIN_05_Ckt_v17_2016Dec01.LDF”
The LDM shall consider LDF BCM_G2_LIN_05_Ckt_v... 槐杨
17:07 功能 #2728 (已关闭): Ford_SWER_006x_0002：If either LB hardwire status and Headlamp_Low_Beams_Out ON status is ON,then LB Function shall ON: 槐杨
17:01 功能 #2727 (已关闭): Ford_SWER_006x_0001：LDM shall report the LB Outage while LB hardwire status and Headlamp_Low_Beams_Out ON status mismatch within1000ms: 目前采用LB硬线作为激活信号，当出现意外的硬线丢失时，LDM应在LB硬线激活状态与LIN信号“Headlamp_Low_Beams_Out”ON状态不匹配时报告LB硬线输入故障报告，且需1000ms报告。
关联Open is... 槐杨
16:58 功能 #2645 (已解决): Ford_SWER_0013_0006：Channel 2 to 4 Functional Configuration（TI）: 培源左
16:57 功能 #2644 (已解决): Ford_SWER_0013_0005：Channel 2 to 4 Functional Configuration（DRL）: 培源左
16:57 功能 #2726 (已关闭): Ford_SWER_0086_0009: MEC change: MEC值更新后,需要上位机通过$11服务复位LDM方可更新输出状态盛炜朱
16:56 功能 #2725 (已关闭): Ford_SWER_0086_0008: CANOE change MEC: MEC值更新后,需要上位机通过$11服务复位LDM方可更新输出状态,$11服务自动跟在$2E服务后,无需再次点击. 盛炜朱
16:56 功能 #2643 (已解决): Ford_SWER_0013_0004：Channel 2 to 4 Functional Configuration（HB）: 培源左
16:55 功能 #2642 (已解决): Ford_SWER_0013_0003：Channel 2 to 4 Functional Configuration（LB）: 培源左
16:54 功能 #2641 (已解决): Ford_SWER_0013_0002：Channel 2 to 4 Functional Configuration（Not used）: 培源左
16:52 功能 #2640 (已解决): Ford_SWER_0013_0001：Channel 2 to 4 Functional Configuration（Dataset配置）: 培源左
16:48 功能 #2724 (已关闭): Ford_SWER_0060_0008：LIN Bus Failures- report/status frame: 诊断反馈仅对报告/状态帧有效。其余帧不反馈诊断信息。
Diagnostic purposes is only valid for report/status frame. 槐杨
16:47 功能 #2723 (已关闭): Ford_SWER_0086_0007: CANOE read of MEC: "EDF2"中可读取MEC值,可通过$22服务读EDF2,具体请见"Ford LDM4 Diagnostic Parameter Tables"表格
上位机通过读EDF2获取MEC状态,不需转义,只需直接读取LDM中存储的MEC值盛炜朱
16:42 功能 #2639 (已解决): Ford_SWER_0011_0007：Turn Indicator Failsafe Mode（TI Feedback）: 培源左
16:41 功能 #2722 (已关闭): Ford_SWER_0086_0006: read of MEC: "EDF2"中可读取MEC值,可通过$22服务读EDF2,具体请见"Ford LDM4 Diagnostic Parameter Tables"表格盛炜朱
16:41 功能 #2638 (已关闭): Ford_SWER_0011_0006：Turn Indicator Failsafe Mode（Active Load Fault Reporting via LIN）: 培源左
16:40 功能 #2721 (已关闭): Ford_SWER_0060_0007：LIN Bus Failures- Other wires: 除电源、接地或串行数据外，ECU的任何单线电路短路或断路不应妨碍与该ECU进行诊断通信的能力。
A short or open in any single wiring circuit of an ECU, except for... 槐杨
16:39 功能 #2720 (已关闭): Ford_SWER_0086_0005: CANOE write MEC: 写入MEC值需要先通过$27服务解锁,然后通过$2E服务写入,具体请见"Ford LDM4 Diagnostic Parameter Tables"表格
上位机中该功能还需要权限管理,不能拿到上位机就可以写MEC. 盛炜朱
16:39 功能 #2637 (已解决): Ford_SWER_0011_0005：Turn Indicator Failsafe Mode（N-1 Failure Detection）: 培源左
16:38 功能 #2719 (已关闭): Ford_SWER_0086_0004: write MEC: 写入MEC值需要先通过$27服务解锁,然后通过$2E服务写入,具体请见"Ford LDM4 Diagnostic Parameter Tables"表格盛炜朱
16:37 功能 #2718 (已关闭): Ford_SWER_0060_0006：LIN Bus Failures- Bus Wiring Short to Battery Rcv: 当总线短接电源故障排除后，在功能延迟章节确定的时间内，无需操作员干预即可恢复正常操作。
Upon removal of the fault, normal operation shall resume without any ... 槐杨
16:35 功能 #2717 (已关闭): Ford_SWER_0060_0005：LIN Bus Failures- Bus Wiring Short to Battery: 当母线短接正极电池小于26.5 V （Vbatt < 26.5 V）时，网络数据通信可能中断，但不会损坏任何设备。母线与电池之间的网络阻抗小于50 Ω应视为短接，不保证或不要求继续通信。
Network data communi... 槐杨
16:34 功能 #2636 (已解决): Ford_SWER_0011_0004：Turn Indicator Failsafe Mode（Channel Open/Short Detection）: 培源左
16:33 功能 #2635 (已解决): Ford_SWER_0011_0003：Turn Indicator Failsafe Mode（TI Bin Sense）: 培源左
16:31 功能 #2716 (已关闭): Ford_SWER_0060_0004：LIN Bus Failures- Bus Wiring Short to Ground Rcv: LIN短路至地故障排除后，在功能延迟章节REQ0040(#2560), 确定的时间内，无需操作员干预即可恢复正常操作。
Upon removal of the fault, normal operation shall resu... 槐杨
16:30 功能 #2634 (已解决): Ford_SWER_0011_0002：Turn Indicator Failsafe Mode（TI Thermal Derating）: 培源左
16:30 功能 #2715 (已关闭): Ford_SWER_0060_0003：LIN Bus Failures- Bus Wiring Short to Ground: 母线和地之间的网络阻抗小于50 Ω应被认为是短地，不保证或不需要继续通信。网络数据通信可能中断，但当总线接地短路时，不会损坏任何ECU。
Network data communications may be interrupte... 槐杨
16:29 功能 #2633 (已解决): Ford_SWER_0011_0001：Turn Indicator Failsafe Mode（TI Light Output）: 培源左
16:28 功能 #2714 (已关闭): Ford_SWER_0060_0002：LIN Bus Failures-LDM Power Loss Rcv: 恢复正常电源后，在功能延迟章节REQ0040（#ID2560），规定的时间内，无需操作人员干预即可恢复正常操作。
Upon return to normal power, normal operation shall resum... 槐杨
16:25 功能 #2713 (已关闭): Ford_SWER_0060_0001：LIN Bus Failures-LDM Power Loss: LDM功率损耗- LDM在功率损耗（或低电压）情况下不会干扰其余总线ecu （LDM， HCM）之间的正常通信。
LDM Power Loss – LDM shall not interfere with normal comm... 槐杨
16:20 功能 #2629 (进行中): Ford_SWER_0010_0009：Channel 1 Failsafe Mode(Channels 2-4 Assigned to LB): 培源左
16:18 功能 #2627 (进行中): Ford_SWER_0010_0008：Channel 1 Failsafe Mode(Light Connected to CH1 Low Side Driver): 培源左
16:17 功能 #2626 (进行中): Ford_SWER_0010_0007：Channel 1 Failsafe Mode(Static Bending): 培源左
16:15 功能 #2712 (已关闭): Ford_SWER_0086_0003: MEC function specification: |场景|MEC值|LDM Dataset|说明|
|产线|0xFF|EOL Dataset|模块按照EOL Dataset配置输出, APINFO4 = 1|
|下线|0x00|EOL Dataset|模块无输出(BUCK CHN... 盛炜朱
16:12 功能 #2711 (已关闭): Ford_SWER_0059_0011：LIN Lost- Front fog: 如果LIN丢失，前雾将被取消。
Front fog is to be deactivated in case of LIN lost. 槐杨
16:10 功能 #2710 (已关闭): Ford_SWER_0059_0010：LIN Lost- Lit star: 如果LIN丢失，Lit star灯将被停用。
Lit star is to be deactivated in case of LIN lost. 槐杨
16:08 功能 #2709 (已关闭): Ford_SWER_0059_0009：LIN Lost- Side Marker: 如果LIN丢失，SM灯将被激活。
Side Marker is to be activated in case of LIN lost. 槐杨
16:05 功能 #2708 (已关闭): Ford_SWER_0059_0008：LIN Lost- LIN DRL: If DRL/PL configured with LIN triggle,software should control DRL is to be activated with ‘ParkPos_Intensity_cfg’ in ... 槐杨
16:04 功能 #2707 (已关闭): Ford_SWER_0059_0007：LIN Lost- TI/LB/DRL Hardwared: TI/LB/DRL Hardwared 激活不依赖于LIN信号，也没有任何LIN丢失的故障模式
TI/LB/Hardwired DRL activation are not dependent on LIN signals an... 槐杨
16:01 功能 #2706 (已关闭): Ford_SWER_0059_0006：LIN Lost- HB Off: Software should turn off HB,when LIN lost occured. 槐杨
15:58 功能 #2705 (已关闭): Ford_SWER_0086_0002: MEC data requirement: 1. 软件在NVM中存在生产模式标志位-"MEC";
2. MEC标志位被清除后，上位机发送退出MEC指令，模块在1s之内，跳转到"下线"或者"装灯"状态盛炜朱
15:56 功能 #2703 (已关闭): Ford_SWER_0086_0001: output status when MEC = 0: 由于EOL模式需要测试LDM的极限输出能力所有通道均使能输出, 故出厂后需要关闭所有输出(BUCK CHN/PWM CHN/LSSS CHN)以防止LDM装灯后写入整灯项目配置前烧坏负载. 盛炜朱
15:53 功能 #2702 (已关闭): Ford_SWER_0059_0004：LIN Lost- last valid frames: 如果收到损坏的帧，软件将按最后接收到的有效帧执行，维持最后一帧状态输出.
If corrupt frames are received, the last valid frames shall be used in the ... 槐杨
15:47 功能 #2701 (已关闭): Ford_SWER_0059_0003：LIN Lost- Recover: 如果LDM在500ms内接收到3个有效的LIN信号，LDM将恢复正常工作。
The LDM shall go back to normal function if the LDM receives 3 valid LIN s... 槐杨
15:45 功能 #2700 (已关闭): Ford_SWER_0059_0002：LIN Lost- Above and equal Voltage: 模块main power电压大于等于7V时，2000ms （+/- 50mS）无LIN消息或损坏LIN消息，会出现“LIN丢失”的情况：
A “LIN lost” situation occurs if:
2000... 槐杨
15:44 功能 #2699 (已关闭): Ford_SWER_0059_0001：LIN Lost-Under Voltage: 当模块main power电压低于7V时，5000ms （+/- 50mS）没有收到LIN消息或损坏的LIN消息，会出现“LIN丢失”的情况：
A “LIN lost” situation occurs if:
5... 槐杨
15:44 功能 #2624 (进行中): Ford_SWER_0010_0006：Channel 1 Failsafe Mode(Active Load Fault Reporting via LIN): 培源左
15:43 功能 #2623 (进行中): Ford_SWER_0010_0005：Channel 1 Failsafe Mode(N-1 Failure Detection): 培源左
15:40 功能 #2621 (已解决): Ford_SWER_0010_0004：Channel 1 Failsafe Mode(Channel Open/Short Detection): 培源左
15:39 功能 #2620 (已解决): Ford_SWER_0010_0003：Channel 1 Failsafe Mode(LB Bin Sense): 培源左
15:38 功能 #2698 (已关闭): Ford_SWER_0058_0003：NTC Thermistor Failure-FAN: 如果NTC电阻丢失或者超出范围，且功能/FAN绑定该NTC的时候，分配的FAN需运行
(Even if there is a Fan attached, the LDM shall run the Fan.) 槐杨
15:37 功能 #2619 (已解决): Ford_SWER_0010_0002：Channel 1 Failsafe Mode(LB Thermal Derating): 培源左
15:35 功能 #2697 (已关闭): Ford_SWER_0058_0002：NTC Thermistor Failure-out is of range: 如果NTC电阻超出范围：
1. 如果配置了NTC降额，LED按照最低降额点输出；
2. 如果没有配置NTC降额，led 应由RBIN电阻定义的电流驱动
(If the NTC resistor is lost or its va... 槐杨
15:33 功能 #2696 (已关闭): Ford_SWER_0001_0002：因CH2不可用进入Failsafe工况后，其他通道也可以作为相对应灯光的功率输入线: 需求：but the LDM shall be also capable of switching to the failsafe power supply when the main power supply is not avai... 云浩汪
15:32 功能 #2695 (已关闭): Ford_SWER_0010_0010：Channel 1 Failsafe Mode(BCM failsafe mode): 软件中需要周期性识别主电源（Input Channel2）是否存在，若丢失主电源(Input channel 2 = LOW)，且此时Input Channel1和Input Channel3任一个存在，或同时存在，则进入BCM fa... 培源左
15:31 功能 #2694 (已关闭): Ford_SWER_0058_0001：NTC Thermistor Failure-lost: 如果NTC电阻丢失：
1. 如果配置了NTC降额，LED按照最低降额点输出；
2. 如果没有配置NTC降额，led 应由RBIN电阻定义的电流驱动
(If the NTC resistor is lost or its valu... 槐杨
15:25 功能 #2693 (已关闭): Ford_SWER_0057_0002：Binning Resistor Lost or Out of Range - Out of Range: 如果RBIN电阻超出范围，不应导致通道过流超过BCM电流限制，LDM使用模块存储的历史档位，实现电流输出
(If the binning resistor is lost (short circuit or open circu... 槐杨
15:24 功能 #2692 (已关闭): Ford_SWER_0057_0001：Binning Resistor Lost or Out of Range - Lost: 如果RBIN电阻丢失（未识别到有效档位），不应导致通道过流超过BCM电流限制，LDM使用模块存储的历史档位，实现电流输出
(If the binning resistor is lost (short circuit or op... 槐杨
15:19 功能 #2691 (已关闭): Ford_SWER_0056_0003： Buck Failure Detection - Open circuits: buck自身检测到的失败如下：
开路
（The failures that the buck itself detects are the followings:
Open circuits
）
!c... 槐杨
15:19 功能 #2690 (已关闭): Ford_SWER_0056_0002： Buck Failure Detection - Short to battery in HSD when it is off: buck自身检测到的失败如下：
HSD关闭时，HSD短路到电源
（The failures that the buck itself detects are the followings:
o Short... 槐杨
15:17 Bug #2689 (Bug-已关闭): boost问题: 在dataset上设置BOOST电压为0v，这个时候boost电压测量还有5v的电压（C63）传鹏胡
15:14 功能 #2688 (已关闭): Ford_SWER_0056_0001： Buck Failure Detection-Short to GND: buck自身检测到的失败如下：
短接GND
（The failures that the buck itself detects are the followings:
Short to GND
）
!... 槐杨
15:10 功能 #2687 (已关闭): Ford_SWER_0055_0006：LDM Failure Response Reporting-TI: 如果发生LED故障（LED串开载或短路（LED≥1个短路）），LDM应在主电源在保证性能范围内（9-18V），“Ignition_status”为“Run/Start”时，TI应始终通过硬线‘ L/RF_LED_Turn_Outage... 槐杨
15:08 功能 #2686 (已关闭): Ford_SWER_0055_0005：LDM Failure Response Reporting-DRL Failure Report cfg: 如果发生LED故障（LED串开载或短路（LED≥1个短路）），LDM应在主电源在保证性能范围内（9-18V），“Ignition_status”为“Run/Start”时，通过配置实现是否通过LIN总线报告故障。
（In cas... 槐杨
15:07 功能 #2617 (已解决): Ford_SWER_0010_0001：Channel 1 Failsafe Mode(LB Light Output): 培源左
15:06 功能 #2685 (已关闭): Ford_SWER_0055_0004：LDM Failure Response Reporting-HB Failure Report cfg: 如果发生LED故障（LED串开载或短路（LED≥1个短路）），LDM应在主电源在保证性能范围内（9-18V），“Ignition_status”为“Run/Start”时，通过配置实现是否通过LIN总线报告故障。
（In cas... 槐杨
15:05 功能 #2684 (已关闭): Ford_SWER_0055_0003：LDM Failure Response Reporting-LB Failure Report cfg: 如果发生LED故障（LED串开载或短路（LED≥1个短路）），LDM应在主电源在保证性能范围内（9-18V），“Ignition_status”为“Run/Start”时，通过配置实现是否通过LIN总线报告故障。
（In cas... 槐杨
15:02 功能 #2683 (已关闭): Ford_SWER_0055_0002：LDM Failure Response Reporting-IG Status: 如果发生LED故障（LED串开载或短路（LED≥1个短路）），LDM应在主电源在保证性能范围内（9-18V），“Ignition_status”为“Run/Start”时，能够通过LIN总线报告故障。
（In case of a... 槐杨
15:02 功能 #2682 (已关闭): Ford_SWER_0001_0001：正常工况下，CH2通道为功率输入线，其他通道为逻辑输入线: 需求原文：The LDM will use Channel2 as main power input as HS REQ005, and rest channels input to be used as an input signa... 云浩汪
15:02 功能 #2681 (已关闭): Ford_SWER_0055_0001：LDM Failure Response Reporting-Voltage range: （In case of a LED failure (LED string open load or short circuit (LEDs ≥1 short circuit（parameter xx_Failure_Deact_cf... 槐杨
14:50 功能 #2680 (已关闭): Ford_SWER_0054_0008：Load Failure Response Deactivation-Over Voltage range: 输入电压超出9-16V范围后，不反馈其余故障，仅反馈输入故障
(When the input voltage exceeds the range of 9-16V, no fault is reported, only unde... 槐杨
14:46 功能 #2679 (已关闭): Ford_SWER_0054_0007：Load Failure Response Deactivation-N-1 Failure: 注：当N-1 LED单光功能失效时，其他功能继续工作。
示例：当LSD的led失效时，下一个更高的子系统（例如，High Side Driver）仍将根据上述参数工作。
NOTE: In case of N-1 LED fai... 槐杨
14:46 功能 #2677 (已解决): Ford_SWER_0009_0001：Channel 1 output Assignment(Dataset Channel 1 combine LB): 已完成培源左
14:41 功能 #2677 (已关闭): Ford_SWER_0009_0001：Channel 1 output Assignment(Dataset Channel 1 combine LB): Dataset中Output Channel1功能配置固定为LB不可修改。
(The configuration of the Output Channel1 function in Dataset is fixed to LB a... 培源左
14:45 功能 #2678 (已关闭): Ford_SWER_0009_0002：Channel 1 output Assignment(APP Channel 1 combine LB): 软件中Output Channel1默认绑定LB功能输出，不能通过配置改变。
(Output Channel1 in the software is bound to the LB output by default and can... 培源左
14:37 功能 #2676 (已关闭): Ford_SWER_0054_0006：Load Failure Response Deactivation-TI Cfg: 如果发生故障（1个或多个LED开载或短路），受影响组件的下一个更高的子系统（整个LED串）是否停用，可以通过参数进行配置。
‘ TI_ Failure_Deact_cfg ’参数定义：
•0x00：不需要去激活
•0x01：在检... 槐杨
14:32 功能 #2675 (已关闭): Ford_SWER_0053_0005：General LED Failure Detection_Power up: 在LDM通电500毫秒内，不能通过LIN报告故障。在每次“LDM电源循环”期间，故障检测将重新开始。
该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到阴极... 槐杨
14:29 功能 #2660: Ford_SWER_0053_0003：General LED Failure Detection_LIN feedback: 在1s内反馈故障槐杨
11:11 功能 #2660 (已关闭): Ford_SWER_0053_0003：General LED Failure Detection_LIN feedback: 每次故障都需要通过LIN进行通信。在报告故障之前，需要至少在1秒内对故障进行10次验证。
该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到阴极断路
• BIN/... 槐杨
14:29 功能 #2674 (已关闭): Ford_SWER_0053_0002：General LED Failure Detection_IG status: 在每个“LDM电源周期”中（模块重新上电），重新启动停机检测。
（On every ‘LDM power cycle’ the outage detection is restarted.）槐杨
14:21 功能 #2659: Ford_SWER_0053_0001：General LED Failure Detection_Voltage range: 故障检测仅在通道处于开启状态且输入电压在保证性能范围内（9-16V）时发生。超出范围时不报故障。
该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到... 槐杨
11:09 功能 #2659 (已关闭): Ford_SWER_0053_0001：General LED Failure Detection_Voltage range: 故障检测仅在通道处于开启状态且输入电压(Main Power)在保证性能范围内（9-16V）时发生。
该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到阴极断路
... 槐杨
14:10 功能 #2673 (已关闭): Ford_SWER_0054_0005：Load Failure Response Deactivation-DRL Cfg: 如果发生故障（1个或多个LED开载或短路），受影响组件的下一个更高的子系统（整个LED串）是否停用，可以通过参数进行配置。
‘ DRL_ Failure_Deact_cfg ’参数定义：
•0x00：不需要去激活
•0x01：在... 槐杨
14:10 功能 #2530 (进行中): Ford_SYSR：FS_REQ0010_V1 Channel 1 Failsafe Mode: 斌徐
13:52 功能 #2672 (已关闭): Ford_SWER_0054_0004：Load Failure Response Deactivation-HB Cfg: 如果发生故障（1个或多个LED开载或短路），受影响组件的下一个更高的子系统（整个LED串）是否停用，可以通过参数进行配置。
‘ HB_ Failure_Deact_cfg ’参数定义：
•0x00：不需要去激活
•0x01：在检... 槐杨
13:49 功能 #2671 (已关闭): Ford_SWER_0054_0003：Load Failure Response Deactivation-LB Cfg: 如果发生故障（1个或多个LED开载或短路），受影响组件的下一个更高的子系统（整个LED串）是否停用，可以通过参数进行配置。
‘ LB_Failure_Deact_cfg ’参数定义：
•0x00：不需要去激活
•0x01：在... 槐杨
13:45 功能 #2670 (已关闭): Ford_SWER_0015_0011：Low Side Driver 1 and 2 usage Configuration(LSD Duty Cycle): APP读取Dataset的生成数据，相应LSD通道按照“LSD1/2_ Duty_Cycle_cfg”数据输出占空比。
(The APP reads the generated data of the Dataset, and th... 培源左
13:06 功能 #2669 (已关闭): Ford_SWER_0015_0010：Low Side Driver 1 and 2 usage Configuration(HB/FTP Base IGN): APP读取Dataset数据，若存在“LSD1/2_usage_cfg”为0x02，则收到HB/FTP命令时，若IGN处于运行或启动状态时，才能激活相应的通道输出。
(When the APP reads Dataset data,... 培源左
12:53 功能 #2668 (已关闭): Ford_SWER_0015_0009：Low Side Driver 1 and 2 usage Configuration(DRL2 clash): DRL2只能分配给一个LSD通道。
(DRL2 can only be assigned to one LSD channel.) 培源左
12:51 功能 #2667 (已关闭): Ford_SWER_0054_0002：Load Failure Response Deactivation-Temperature Range: LED断电检测应在-40℃至110℃环境温度范围内工作。
（LED outage detection shall work within -40 to 110°C ambient temperature range）槐杨
12:50 功能 #2666 (已关闭): Ford_SWER_0015_0008：Low Side Driver 1 and 2 usage Configuration(SBL): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x04，则对应LSD关联SBL功能。
当收到SBL信号时，对应LSD应当被激活，并按照设定方式输出。
(The APP reads the genera... 培源左
12:50 功能 #2665 (已关闭): Ford_SWER_0054_0001：Load Failure Response Deactivation-Voltage range: LED断电检测输入电压范围为9-16V。如果输入电压超出范围，则不报告LED断电。
（ Input voltage range for LED outage detection is 9-16V. No LED outages... 槐杨
12:48 功能 #2664 (已关闭): Ford_SWER_0015_0007：Low Side Driver 1 and 2 usage Configuration(DRL2): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x03，则对应LSD关联DRL2功能。
当收到DRL信号时，对应LSD应当被激活，并输出对应“LSDx_ Duty_Cycle_cfg”占空比；
当收到... 培源左
12:46 功能 #2663 (已关闭): Ford_SWER_0015_0006：Low Side Driver 1 and 2 usage Configuration(HB): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x02，则对应LSD关联HB功能。
当收到HB信号时，对应LSD应当被激活，并按照设定方式输出。
(The APP reads the generate... 培源左
12:44 功能 #2662 (已关闭): Ford_SWER_0015_0005：Low Side Driver 1 and 2 usage Configuration(LB): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x01，则对应LSD关联LB功能。
当收到LB信号时，对应LSD应当被激活，并按照设定方式输出。
(The APP reads the generate... 培源左
12:40 功能 #2661 (已关闭): Ford_SWER_0015_0004：Low Side Driver 1 and 2 usage Configuration(Not used): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x00，则对应LSD未关联功能
(The APP reads the generated data of the Dataset. If LSD1/2_u... 培源左
11:07 功能 #2658 (已关闭): Ford_SWER_0015_0003：Low Side Driver 1 and 2 usage Configuration(Dataset LSD cycle): Dataset 可以通过“LSD1/2_ Duty_Cycle_Cfg”配置LSD1/2占空比。
(Dataset Can set the LSD1/2 duty ratio using LSD1/2_Duty_Cycle_Cfg.... 培源左
11:03 功能 #2657 (已关闭): Ford_SWER_0053_0004：General LED Failure Detection_All Chn: 该LDM必须支持对所有输出通道的故障检测,该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到阴极断路
• BIN/NTC超出范围
(The LDM must ... 槐杨
10:55 功能 #2656 (已关闭): Ford_SWER_0015_0002：Low Side Driver 1 and 2 usage Configuration(Dataset DRL2 clash): Dataset 中“LSD1/2_usage_cfg”应该只有一个LSD可以配置为“DRL2”，若两项都配置为“DRL2”时，操作将被撤回，并报错。
(Only one LSD in the Dataset LSD1/2_usage... 培源左

2024-10-27

17:04 功能 #2655 (已关闭): Ford_SWER_0015_0001：Low Side Driver 1 and 2 usage Configuration(Dataset_Lsd_usage): Dataset应该可以通过“LSD1/2_usage_cfg”，配置LSD的功能，并生成对应的数据。
(Dataset should be able to configure LSD functions and generate d... 培源左
15:55 功能 #2654 (已关闭): Ford_SWER_0014_0006：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel4): APP读取Dataset的生成数据，若“LSD1/2_channel_assignment_cfg”为0x04，
则对应LSD连接Channel4输出。
(The APP reads the generated data from... 培源左
15:54 功能 #2653 (已关闭): Ford_SWER_0014_0005：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel3): APP读取Dataset的生成数据，若“LSD1/2_channel_assignment_cfg”为0x03，
则对应LSD连接Channel3输出。
(The APP reads the generated data from... 培源左
15:53 功能 #2652 (已关闭): Ford_SWER_0014_0004：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel2): APP读取Dataset的生成数据，若“LSD1/2_channel_assignment_cfg”为0x02，
则对应LSD连接Channel2输出。
(The APP reads the generated data from... 培源左
15:44 功能 #2648 (已关闭): Ford_SWER_0014_0003：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel1): APP读取Dataset的生成数据，若“LSD1/2_channel_assignment_cfg”为0x01，
则对应LSD连接Channel1输出。
(The APP reads the generated data from... 培源左
15:41 功能 #2647 (已关闭): Ford_SWER_0014_0002：Low Side Driver 1 and 2 Channel Configuration(LSD Not used): APP读取Dataset的生成数据，若“LSD1/2_channel_assignment_cfg”为0x00，
则对应LSD不启用，不会联动任何通道输出。
(The APP reads the generated data fr... 培源左
15:34 功能 #2646 (已关闭): Ford_SWER_0014_0001：Low Side Driver 1 and 2 Channel Configuration(Dataset Cfg): Dataset需要通过“LSD1/2_channel_assignment_cfg”配置项，来配置LSD连接到哪个通道或者不启用，并生成以下对应数据。
(The Dataset uses the LSD1/2_channel_ass... 培源左

导出 Atom

项目

一般

简介

FORD LDM Localization

活动

活动

2024-11-04

2024-11-01

2024-10-31

2024-10-30

2024-10-29

2024-10-28

2024-10-27