功能 #2659
已关闭100%
描述
故障检测仅在通道处于开启状态且输入电压(Main Power)在保证性能范围内（9-16V）时发生。
该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到阴极断路
• BIN/NTC超出范围
(Fault detection occurs only when the channel is on and the input voltage is within the guaranteed performance range (9-16V).
The module must be able to detect the following faults related to leds:
• Single or multiple LED failures (per channel)
• Short circuit from anode to cathode
• Anode to cathode disconnect
• BIN/NTC is out of range)
由 槐 杨 更新于 8 个月 之前
故障检测仅在通道处于开启状态且输入电压在保证性能范围内（9-16V）时发生。超出范围时不报故障。
该模块必须能够检测与LED相关的以下故障：
• 单个或多个LED故障（每个通道）
• 阳极到阴极短路
• 阳极到阴极断路
• BIN/NTC超出范围
(Fault detection occurs only when the channel is on and the input voltage is within the guaranteed performance range (9-16V).
The module must be able to detect the following faults related to leds:
• Single or multiple LED failures (per channel)
• Short circuit from anode to cathode
• Anode to cathode disconnect
• BIN/NTC is out of range)