活动
从 2024-11-01 到 2024-11-10
2024-11-07
- 09:27 Bug #3036 (Bug-已关闭): 故障--Boost
- boost电压配置为40v，LED_Failure_Deact配置为No_deactivate，点灯通道会爆闪，波形如附件(黄色的为Boost，绿色的为通道电压)
!b32fb277557ae2a73e711f6a6fd6a0af_...
2024-11-06
- 19:57 功能 #3009: Ford_SWER_003x_0002：Welcome/Frawell for App
- 编写测试用例
- 19:57 功能 #2680: Ford_SWER_0054_0008：Load Failure Response Deactivation-Over Voltage range
- 编写测试用例
- 19:56 功能 #2679: Ford_SWER_0054_0007：Load Failure Response Deactivation-N-1 Failure
- 编写测试用例
- 19:54 功能 #2623: Ford_SWER_0010_0005：Channel 1 Failsafe Mode(N-1 Failure Detection)
- 编写测试用例
- 16:00 功能 #2639 (进行中): Ford_SWER_0011_0007：Turn Indicator Failsafe Mode（TI Feedback）
- 16:00 功能 #2638 (进行中): Ford_SWER_0011_0006：Turn Indicator Failsafe Mode（Active Load Fault Reporting via LIN）
- 15:59 功能 #2637 (进行中): Ford_SWER_0011_0005：Turn Indicator Failsafe Mode（N-1 Failure Detection）
- 15:59 功能 #2636 (进行中): Ford_SWER_0011_0004：Turn Indicator Failsafe Mode（Channel Open/Short Detection）
- 14:27 功能 #2524: Ford_SYSR：FS_REQ0004_V1 Channel 1 Power Mode
- The LDM Channel 1 shall be powered by BCM Low Beam Circuit(L/RF_Low_Beam_Ckt) as described in Figure 3.
更改为
The L... - 09:15 功能 #3035 (已解决): Ford_SWER_0072_0003：Cofig supports configuration
- 09:15 功能 #3035 (已关闭): Ford_SWER_0072_0003：Cofig supports configuration
- cofig期间需要模块反馈PartNumber
- 09:13 功能 #3033 (已解决): Ford_SWER_0072_0002：Module does not support configuration
- 09:11 功能 #3033 (已关闭): Ford_SWER_0072_0002：Module does not support configuration
- 如果模块不支持配置，APINFO4仍需设置位0
- 09:12 功能 #3034 (已关闭): Ford_SWER_0055_0008：LDM Failure Response Reporting-Reset
- 内部或外部看门狗应控制µC功能，并在需要时复位控制器。
An internal or external watchdog shall control µC function and reset the controller wh... - 09:10 功能 #3032 (已关闭): Ford_SWER_0055_0007：LDM Failure Response Reporting-NVM
- 最后五条错误信息应存储在非易失性存储器中。
The last five error messages shall be stored in the non-volatile memory.
2024-11-05
- 22:28 功能 #3016 (已解决): Ford_SWER_0038_0003：Welcome or Farewell summary
- 编写测试用例
- 22:25 功能 #2738 (进行中): Ford_SWER_0062_0002：LDM diagnostic with test command——Read EDF2
- 22:09 功能 #3031 (已关闭): Ford_SWER_0084_0003: App reflash shall not erase dataset
- Software strategy or APP reflash shall not erase Dataset in NVM to avoid duplicated Dataset write.
- 22:08 功能 #3030 (已关闭): Ford_SWER_0084_0002: LDM shall be flashable via HL main connector
- LDM shall be flashable via HL main connector
- 22:07 功能 #2605 (进行中): Ford_SYSR：FS_REQ0084_V2 Software Flashing
- 20:10 功能 #2615 (已解决): Ford_SWER_0001_0003：电源电压降功率波形
- 编写测试用例
- 18:08 功能 #2690 (已解决): Ford_SWER_0056_0002： Buck Failure Detection - Short to battery in HSD when it is off
- 编写测试用例
- 17:42 功能 #2750: Ford_SWER_0049_0002：Output Thermal Derating Curve For App
- 编写测试用例
- 17:40 功能 #2679 (进行中): Ford_SWER_0054_0007：Load Failure Response Deactivation-N-1 Failure
- 1.8實施
- 17:12 功能 #2896 (已解决): Ford_SWER_0001_0006：电源电压迟滞
- 编写测试用例
- 17:03 功能 #2916 (已解决): Ford_SWER_0023_0009：Turn Indicator Activation(Turn Fault)
- 16:36 功能 #2623 (进行中): Ford_SWER_0010_0005：Channel 1 Failsafe Mode(N-1 Failure Detection)
- 16:23 功能 #3015 (已关闭): Ford_SYSR_Dataset: 2024_11_04
- 16:19 功能 #3013 (已关闭): Ford_SYSR: 软件故障树
- 16:18 功能 #3010 (已关闭): Ford_SYSR: 软件命名规范
- 16:16 功能 #2953 (反馈): Ford_SWER_0085_0003: 数据CRC校验
- 16:16 功能 #2767 (反馈): Ford_SWER_0085_0002: Software test -SSR
- 16:15 功能 #2766 (反馈): Ford_SWER_0085_0001: APP-SSR
- 16:15 功能 #2606 (反馈): Ford_SYSR：FS_REQ0085_V1 Ford Functional Safety
- 16:11 功能 #2989 (已解决): Ford_SWER：FS_REQ0018&REQ0020_0006 High Beam LDM standard ramping for App
- 编写测试用例
- 16:11 功能 #2984 (已解决): Ford_SWER：FS_REQ0018&REQ0020_0004 High Beam channel
- 编写测试用例
- 16:10 功能 #2982 (已解决): Ford_SWER：FS_REQ0018&REQ0020_0002 High Beam ramping accuracy and frequency
- 编写测试用例
- 16:09 功能 #2981 (已解决): Ford_SWER：FS_REQ0018&REQ0020_0001 High Beam activate condition
- 编写测试用例
- 16:09 功能 #2987 (已解决): Ford_SWER：FS_REQ0018&REQ0020_0005 High Beam BCM EEL LIN ramping for App
- 编写测试用例
- 16:03 功能 #2964: Ford_SWER_0087_0045: PV 电源电压与输出电流(客户11月20日有更新,暂未解析)
- Pending to hardware design. we cannot do this requirements
- 15:40 功能 #3009 (进行中): Ford_SWER_003x_0002：Welcome/Frawell for App
- 基于SW0007169.AX01.8，增加该功能
- 15:32 功能 #3028 (已解决): Ford_SWER_ REQ26-REQ30_0008：DRL Response to Flash-To-Pass Activation
- 编写测试用例
- 13:48 功能 #3028 (已关闭): Ford_SWER_ REQ26-REQ30_0008：DRL Response to Flash-To-Pass Activation
- Precondition：If the DRL is active, and flash to pass signal is received via LIN and IGN is either run or start;
‘DRL... - 15:32 功能 #3027 (已解决): Ford_SWER_ REQ26-REQ30_0007：DRL Response to Turn Indicator Activation
- 编写测试用例
- 13:29 功能 #3027 (已关闭): Ford_SWER_ REQ26-REQ30_0007：DRL Response to Turn Indicator Activation
- ‘LSDx_usage_cfg’<>0x03, use 1 DRL behavior;‘LSDx_usage_cfg’=0x03, use 2 DRL behavior;
!clipboard-202411051329-wa1tc.... - 15:31 功能 #3023 (已解决): Ford_SWER_ REQ26-REQ30_0004：DRL BCM LIN
- 编写测试用例
- 12:57 功能 #3023 (已关闭): Ford_SWER_ REQ26-REQ30_0004：DRL BCM LIN
- DRL request shall take a higher priority than Position request
|DRL_Rqst |Position_Park_Left_Cmd |Position_Park_Rig... - 15:30 功能 #3022 (已解决): Ford_SWER_ REQ26-REQ30_0003：DRL direct wire control
- 编写测试用例
- 10:51 功能 #3022 (已关闭): Ford_SWER_ REQ26-REQ30_0003：DRL direct wire control
- 1、If BCM DRL direct wire duty cycle >= “DRL_POS_TriggerDC_cfg”, it should be DRL intensity,
2、If 5% <= BCM DRL dire... - 15:29 功能 #3021 (已关闭): Ford_SWER_ REQ26-REQ30_0002： Accuracy and Frequency - Dataset
- Dataset requirements
- 10:27 功能 #3021 (已关闭): Ford_SWER_ REQ26-REQ30_0002： Accuracy and Frequency - Dataset
- “DRL_POS_Trigger_DutyCycle_cfg” need to be selected in the dataset
Values range between 10-41%, 200Hz（If DRL input f... - 15:28 功能 #3020 (已关闭): Ford_SWER_ REQ26-REQ30_0001： DRL Control Strategy - Dataset
- Dataset requirements
- 10:16 功能 #3020 (已关闭): Ford_SWER_ REQ26-REQ30_0001： DRL Control Strategy - Dataset
- 1、BCM LIN
2、BCM ‘L/RF_DRL_LAMP_Ckt’ direct wire - 15:26 功能 #3018 (已解决): Ford_SWER_0029_0001：DRL Response to Turn Indicator Activation
- 编写测试用例
- 09:29 功能 #3018 (已关闭): Ford_SWER_0029_0001：DRL Response to Turn Indicator Activation
- 1、‘DRL_activation_time_after_deact_cfg’：Range: 0ms to 1000ms; Resolution: 100ms
2、‘LSDx_usage_cfg’<>0x03, use 1 DRL ... - 15:22 功能 #3029 (已关闭): Ford_SWER_ REQ26-REQ30_0009：DRL_activation_time_after_deact_cfg for dataset
- Dataset requirements
- 13:50 功能 #3029 (已关闭): Ford_SWER_ REQ26-REQ30_0009：DRL_activation_time_after_deact_cfg for dataset
- ‘DRL_activation_time_after_deact_cfg’need to be selected in the dataset.
Range: 0ms to 1000ms; Resolution: 100ms - 15:21 功能 #3024 (已关闭): Ford_SWER_ REQ26-REQ30_0005：Output duty cycle for dataset
- Dataset requirements
- 13:05 功能 #3024 (已关闭): Ford_SWER_ REQ26-REQ30_0005：Output duty cycle for dataset
- ‘DRL_Intensity_cfg’ should be 100% as default value，does not require configuration.
‘ParkPos_Intensity_cfg’can be se... - 15:18 功能 #3026 (反馈): Ford_SWER_ REQ26-REQ30_0006：DRL Response to Low Beam outage
- 已跟Ford现场确认，下一版实施 @陆涛
- 13:26 功能 #3026 (已关闭): Ford_SWER_ REQ26-REQ30_0006：DRL Response to Low Beam outage
- “DRL_LB_Outage_cfg”need to be selected in the dataset,it determines if DRL is affected by LB outage.
!clipboard-... - 15:08 错误 #2966 (已解决): Ford_SWER_0087_0047：转向反馈信号规格
- 编写测试用例
- 13:17 功能 #3025 (反馈): Ford_SWER_0035_0004：Static Bending Light Activation and Deactivation Hysteresis
- 13:16 功能 #3025 (已关闭): Ford_SWER_0035_0004：Static Bending Light Activation and Deactivation Hysteresis
- The SBL activation and deactivation shall have a hysteresis of vehicle 10% triggle speed and 10% steering angle to av...
- 10:06 功能 #3019 (已关闭): Ford_SYSR：Daytime Running Lamp (DRL)/Park Lamp Drive Mode Activation
- REQ26
The module will be capable of determining DRL state by either BCM LIN or by BCM ‘L/RF_DRL_LAMP_Ckt’ direct wir... - 09:43 功能 #2550 (进行中): Ford_SYSR：FS_REQ0030_V1 DRL Response to Flash-To-Pass Activation
- 09:09 功能 #2548 (反馈): Ford_SYSR：FS_REQ0028_V1 DRL Response to Low Beam outage
- 目前项目无此需求，待需求确认再开发
- 08:57 功能 #3017 (已关闭): Ford_SYSR：FS_REQ0029_V1 DRL Response to Turn Indicator Activation
- In EEL LIN systems, the LDM shall take the configured performance control action when the TI is activated on the same...
2024-11-04
- 20:06 功能 #3016 (已关闭): Ford_SWER_0038_0003：Welcome or Farewell summary
- !clipboard-202411042006-yrovc.png!
- 18:03 功能 #2875: Ford_SWER_0023_0005：Turn Indicator Activation( Dataset “DRL_Combined_TI_cfg”& "DRL_TI_Control_cfg")
- 客户FS更新
- 16:06 功能 #2796 (已解决): Ford_SWER_0071_0003：Errors are reported once in LIN communicaition
- 软件完成
- 16:05 功能 #2790 (已解决): Ford_SWER_0071_0002：Error Status meanings in first byte for LIN communication
- 软件完成
- 15:33 功能 #3008 (已关闭): Ford_SWER_003x_0001：Welcome/Frawell for dataset
- Dataset requirements
- 15:31 功能 #2983 (已关闭): Ford_SWER：FS_REQ0018&REQ0020_0003 High Beam control mode for dataset
- Dataset requirements
- 15:31 功能 #2995 (已关闭): Ford_SWER：FS_REQ0018&REQ0020_0005 High Beam BCM EEL LIN ramping for dataset
- Dataset Requirements
- 15:30 功能 #2996 (已关闭): Ford_SWER：FS_REQ0018&REQ0020_0006 High Beam LDM standard ramping for dataset
- Dataset requirements
- 15:25 功能 #2675 (已解决): Ford_SWER_0053_0005：General LED Failure Detection_Power up
- 15:24 功能 #2660 (已解决): Ford_SWER_0053_0003：General LED Failure Detection_LIN feedback
- 14:10 功能 #3002 (已关闭): Ford_SWER_0051_004: NTC resistance and B-constant value configuration in Dataset
- 14:09 功能 #2750: Ford_SWER_0049_0002：Output Thermal Derating Curve For App
- 编写测试用例
- 14:06 功能 #2749 (已关闭): Ford_SWER_0049_0001：Output Thermal Derating Curve Dataset Configure
- Dataset requirements
- 14:05 功能 #2751 (已关闭): Ford_SWER_0048_0001：Output Channel Thermal Monitoring NTC Source Select For Dataset
- 13:53 功能 #2754 (已关闭): Ford_SWER_0046_0001：Fan Failure Detection Of Dataset
- Dataset requirements
- 13:51 功能 #2758 (已关闭): Ford_SWER_0045_0003：NTC Temperatur Triggle Fan For Dataset
- Dataset requirements
- 13:51 功能 #2757 (已关闭): Ford_SWER_0045_0002：NTC Source Triggle Fan For Dataset
- Dataset requirements
- 13:51 功能 #2756 (已关闭): Ford_SWER_0045_0001：Activation of the Fan For Dataset
- Dataset requirements
- 13:50 功能 #2759 (已关闭): Ford_SWER_0044_0001： FAN Functional self-test when power on for dataset
- Dataset requirements
- 13:49 功能 #2761 (已关闭): Ford_SWER_0043_0001：Bin Class Current Setting For Dataset
- Dataset Requirements
- 13:48 功能 #2763 (已关闭): Ford_SWER_0042_0001：Bin Source Select For Dataset
- Dataset Requirements
- 13:34 功能 #3015 (已关闭): Ford_SYSR_Dataset: 2024_11_04
- !clipboard-202411041326-kgeun.png!
Derate5的Dimming范围放开:0~100%, 精度5% - 13:31 功能 #2557 (反馈): Ford_SYSR：FS_REQ0037_V1 PWM channel Welcome/Farewell Activation
- 10:13 功能 #2557 (已解决): Ford_SYSR：FS_REQ0037_V1 PWM channel Welcome/Farewell Activation
- Dataset requirements
- 10:13 功能 #2822 (已关闭): Ford_SWER_0037_0001：PWM channel Welcome/Farewell For Dataset
- Dataset requirements
- 10:12 功能 #2824 (已关闭): Ford_SWER_0036_0001：DRL Welcome/Farewell For Dataset
- Data set requirements
- 10:11 功能 #2555 (反馈): Ford_SYSR：FS_REQ0035_V1 Static Bending Light Activation
- 10:07 功能 #2554 (反馈): Ford_SYSR：FS_REQ0034_V1 Side marker Activation
- 10:07 功能 #3006 (反馈): Ford_SWER_0034_0002：Right side light activation mode
- 10:06 功能 #2890 (反馈): Ford_SWER_0034_0001：Left side light activation mode
- 10:04 功能 #3014 (新建): Ford_SYSR: NVM数据写入条件
- 待讨论
- 09:24 功能 #2872 (已关闭): Ford_SWER_0030_0001：DRL Response to Flash-To-Pass Activation For Dataset
- data set requirement
- 09:16 功能 #3001 (已解决): Ford_SWER_0028_0002：DRL Response to Low Beam outage for App
- 09:15 功能 #2878 (已关闭): Ford_SWER_0028_0001：DRL Response to Low Beam outage for dataset
- data set requirement
2024-11-01
- 19:14 功能 #2605 (已拒绝): Ford_SYSR：FS_REQ0084_V2 Software Flashing
- conti development requirements, not for HASCO
- 19:13 功能 #2603 (已拒绝): Ford_SYSR：FS_REQ0082_V1 Supplier Defined: Service Return and Development Reporting
- regular can message, conti development requirements
- 19:13 功能 #2876 (已拒绝): Ford_SWER_0082_0003:LDM Diag service ID
- regular can message, conti development requirements
- 19:13 功能 #2873 (已拒绝): Ford_SWER_0082_0002:LDM Service and Diagnostics Report Frame define
- regular can message, conti development requirements
- 19:13 功能 #2870 (已拒绝): Ford_SWER_0082_0001:LDM Diagnostic service requirement
- regular can message, conti development requirements
- 19:11 功能 #2602 (已拒绝): Ford_SYSR：FS_REQ0081_V1 Supplier Defined: Lamp Manufacturing
- conti requirements， not for HASCO Manufacotory
- 19:10 功能 #3004 (已关闭): Ford_SWER_0027_0002：DRL EEL LIN command Table for dataset
- 13:30 功能 #3004 (已解决): Ford_SWER_0027_0002：DRL EEL LIN command Table for dataset
- Dataset “ParkPos_Intensity_cfg”配置项已完成,“DRL_intensity_cfg”与客户确认无需配置
- 19:08 功能 #3007 (已解决): Ford_SWER_0026_0004：DRL frequency
- 编写测试用例
- 13:36 功能 #3007 (已关闭): Ford_SWER_0026_0004：DRL frequency
- If DRL input frequency>210Hz||<190Hz,software should ignore this PWM.
- 19:03 功能 #2865 (已关闭): Ford_SWER_0026_0002：DRL value for dataset
- 19:03 功能 #2858 (已关闭): Ford_SWER_0026_0001：DRL Control Mode for dataset
- 18:59 功能 #2825 (已关闭): Ford_SWER_0024_0001: Turn Indicator Delay(Dataset Cfg)
- 18:56 功能 #2875 (已关闭): Ford_SWER_0023_0005：Turn Indicator Activation( Dataset “DRL_Combined_TI_cfg”& "DRL_TI_Control_cfg")
- 18:55 功能 #2846 (进行中): Ford_SWER_0023_0001：Turn Indicator Activation(the definition of the operational state of the Turn Indicator)
- 18:53 功能 #2997 (已关闭): Ford_SWER_0022_0002：High Beam EEL Front Fog Activation Reaction for dataset
- 13:17 功能 #2997 (已解决): Ford_SWER_0022_0002：High Beam EEL Front Fog Activation Reaction for dataset
- 18:40 功能 #2819 (已关闭): Ford_SWER_0016_0016:PWM output configuration(Dataset PWM DRL1/2 Duty Cycle)
- 18:40 功能 #2774 (已关闭): Ford_SWER_0016_0002:PWM output configuration(Dataset PWM Duty Cycle)
- 18:40 功能 #2773 (已关闭): Ford_SWER_0016_0001:PWM output configuration(Dataset PWM Function)
- 18:37 功能 #3013 (已关闭): Ford_SYSR: 软件故障树
- LDM故障策略
https://thf8p89fgm.feishu.cn/docx/V6B8dbLtOoyVOaxGYfIcWflYnag#share-Sv19dm6tpomJCbx5ecxcT6AAne9 - 18:35 功能 #2668 (已关闭): Ford_SWER_0015_0009：Low Side Driver 1 and 2 usage Configuration(DRL2 clash)
- 18:34 功能 #2658 (已关闭): Ford_SWER_0015_0003：Low Side Driver 1 and 2 usage Configuration(Dataset LSD cycle)
- 13:12 功能 #2658: Ford_SWER_0015_0003：Low Side Driver 1 and 2 usage Configuration(Dataset LSD cycle)
- 客户矫正需求
- 18:34 功能 #2656 (已关闭): Ford_SWER_0015_0002：Low Side Driver 1 and 2 usage Configuration(Dataset DRL2 clash)
- 18:33 功能 #2655 (已关闭): Ford_SWER_0015_0001：Low Side Driver 1 and 2 usage Configuration(Dataset_Lsd_usage)
- 18:32 功能 #2770 (已关闭): Ford_SWER_0014_0008：Low Side Driver 1 and 2 Channel Configuration(APP Clash)
- 18:32 功能 #2769 (已关闭): Ford_SWER_0014_0007：Low Side Driver 1 and 2 Channel Configuration(Dataset Clash)
- 18:29 功能 #2646 (已关闭): Ford_SWER_0014_0001：Low Side Driver 1 and 2 Channel Configuration(Dataset Cfg)
- 18:26 功能 #2640 (已关闭): Ford_SWER_0013_0001：Channel 2 to 4 Functional Configuration（Dataset配置）
- 18:25 功能 #2639 (已拒绝): Ford_SWER_0011_0007：Turn Indicator Failsafe Mode（TI Feedback）
- 在failsafe模式下，模块不能常供电，outage内部上拉，TURN故障不能一直报警
- 18:25 功能 #2638 (已拒绝): Ford_SWER_0011_0006：Turn Indicator Failsafe Mode（Active Load Fault Reporting via LIN）
- 在failsafe模式下，模块不能常供电，outage内部上拉，TURN故障不能一直报警
- 18:24 功能 #2637 (已拒绝): Ford_SWER_0011_0005：Turn Indicator Failsafe Mode（N-1 Failure Detection）
- 在failsafe模式下，模块不能常供电，outage内部上拉，TURN故障不能一直报警
- 18:21 功能 #2636 (已拒绝): Ford_SWER_0011_0004：Turn Indicator Failsafe Mode（Channel Open/Short Detection）
- 在failsafe模式下，模块不能常供电，outage内部上拉，TURN故障不能一直报警
- 18:16 功能 #2635: Ford_SWER_0011_0003：Turn Indicator Failsafe Mode（TI Bin Sense）
- 编写测试用例
- 18:15 功能 #2634: Ford_SWER_0011_0002：Turn Indicator Failsafe Mode（TI Thermal Derating）
- 编写测试用例
- 18:15 功能 #2633: Ford_SWER_0011_0001：Turn Indicator Failsafe Mode（TI Light Output）
- 编写测试用例
- 18:13 功能 #2977 (已解决): Ford_SWER_0010_0011：Channel 1 Failsafe Mode
- 18:04 功能 #2627 (已解决): Ford_SWER_0010_0008：Channel 1 Failsafe Mode(Light Connected to CH1 Low Side Driver)
- 编写测试用例
- 18:02 功能 #2624: Ford_SWER_0010_0006：Channel 1 Failsafe Mode(Active Load Fault Reporting via LIN)
- 编写测试用例
- 18:02 功能 #2817: Ford_SWER_0080_0003:Self-Test“Cycle all” 不报故障
- 目前项目不需要，下一版开发
- 18:01 功能 #2621: Ford_SWER_0010_0004：Channel 1 Failsafe Mode(Channel Open/Short Detection)
- 编写测试用例
- 18:01 功能 #2620: Ford_SWER_0010_0003：Channel 1 Failsafe Mode(LB Bin Sense)
- 编写测试用例
- 18:01 功能 #2814: Ford_SWER_0080_0002:Self-Test “CycleAll” 指令LDM响应内容
- 目前项目不需求，迭代开发
- 18:00 功能 #2619: Ford_SWER_0010_0002：Channel 1 Failsafe Mode(LB Thermal Derating)
- 编写测试用例
- 18:00 功能 #2617: Ford_SWER_0010_0001：Channel 1 Failsafe Mode(LB Light Output)
- 编写测试用例
- 17:59 功能 #2678: Ford_SWER_0009_0002：Channel 1 output Assignment(APP Channel 1 combine LB)
- 编写测试用例
- 17:58 功能 #2677 (已关闭): Ford_SWER_0009_0001：Channel 1 output Assignment(Dataset Channel 1 combine LB)
- Data Set Requirement
- 17:57 功能 #3012 (新建): Ford_SWER_0079_0003:Software self-test function
- Software shall get the information from Self-Test Command Frame and light on the corresponding channels.
- 17:57 功能 #2801: Ford_SWER_0008_0005: 左右识别的数据调用存储
- 编写测试用例
- 17:57 功能 #2793: Ford_SWER_0008_0004: 左右识别的故障报警
- 编写测试用例
- 17:56 功能 #2791: Ford_SWER_0008_0003: 左右识别的task调度及策略
- 编写测试用例
- 17:56 功能 #2776: Ford_SWER_0008_0001: 左右识别的电压范围
- 编写测试用例
- 17:55 功能 #2777: Ford_SWER_0008_0002: 左右识别AD转换
- 编写测试用例
- 17:54 功能 #2632: Ford_SWER_0007_0002: 转向灯触发信号规格
- 编写测试用例
- 17:53 功能 #2910: Ford_SWER_0079_0002:Self-Test Command Frame Signal define
- 目前不需要，下一阶段开发
- 17:53 功能 #2631 (已关闭): Ford_SWER_0007_0001: 转向灯触发方式
- Data set
- 17:53 功能 #2909: Ford_SWER_0079_0001:Self Test command Frame
- 目前不需要，下一阶段开发
- 17:53 功能 #2973: Ford_SWER_0006_0003: DRL/PO LIN触发方式
- 编写测试用例
- 17:52 功能 #2972: Ford_SWER_0006_0002: DRL/PO硬线触发方式
- 编写测试用例
- 17:51 功能 #3011 (已解决): Ford_SWER_0078_0003： Part Number Value
- 软件已完成，提交给测试
- 17:49 功能 #3011 (已关闭): Ford_SWER_0078_0003： Part Number Value
- Software save PN “P2RB-13B626-AA”in the const and report PN by receiving corrosping ID.
- 17:51 功能 #2889 (已解决): Ford_SWER_0078_0001：Part Number Report
- 软件已完成，提交给测试
- 17:51 功能 #2906 (已关闭): Ford_SWER_0003_0005：Dataset中对于DRL/PO功能的防呆设定
- 17:50 功能 #2885 (已解决): Ford_SWER_0078_0002： Unused bytes handling
- 软件已完成，提交给测试
- 17:49 功能 #2998 (已解决): Ford_SWER_0026_0003：DRL value for App
- 17:48 功能 #2614 (已关闭): Ford_SWER_0003_0004：Dataset中对于DRL/PO功能的配置
- 已完成
- 17:43 功能 #2599: Ford_SYSR：FS_REQ0078_V1 LIN Part Number Reporting
- delete example
- 17:40 功能 #2630 (已关闭): Ford_SWER_0006_0001: DRL/PO触发方式
- 17:38 功能 #2628: Ford_SWER_0005_0001：输入通道2供电模式
- 编写测试用例
- 17:21 功能 #2852 (已解决): Ford_SWER_0077_0001：Compare data of BCM broadcast frames with Cfg_match
- 编写测试用例
- 16:43 功能 #2879 (已关闭): Ford_SWER_0074_0003: LDM Configuration Matching test
- 16:38 功能 #2879 (已解决): Ford_SWER_0074_0003: LDM Configuration Matching test
- 上位机需求
- 16:39 功能 #2881 (已关闭): Ford_SWER_0074_0003: LDM Data Configuration Requirement For BCM
- 16:37 功能 #2877 (已解决): Ford_SWER_0074_0002: LDM Data Configuration LIN data format
- 上位机需求
- 16:35 功能 #2864 (已解决): fORD_SWER_0073_0013: LDM Data Configuration Respond Frame Information
- 16:34 功能 #2861 (已解决): Ford_SWER_0073_0012: LDM Data Configuration should respond “Not configured” immediately
- BCM
- 16:31 功能 #2859 (已解决): Ford_SWER_0073_0011: LDM Data Configuration Start and Over time mechanism
- 15:54 功能 #2831: Ford_SWER_0073_0002：LDM Configuration LIN message ID
!clipboard-202411011554-a2a2m.png!
- 15:07 功能 #2831 (已解决): Ford_SWER_0073_0002：LDM Configuration LIN message ID
- 15:52 功能 #2853 (已解决): Ford_SWER_0073_0010: LDM Data Configuration detailed information
- 15:49 功能 #2850 (已解决): Ford_SWER_0073_0009: LDM Data Configuration LIN data frame bit map
- 15:13 功能 #2844 (已解决): Ford_SWER_0073_0007: LDM Data Configuration LIN frame protocol
- 编写测试用例
- 15:11 功能 #2843: Ford_SWER_0073_0006：LDM personalization configuration information
- 编写测试用例
- 15:09 功能 #2840 (已解决): Ford_SWER_0073_0005：LDM Configuration tirgger method
- 编写测试用例
- 15:08 功能 #2836 (已解决): Ford_SWER_0073_0004：LDM Configuration data transimission method
- 编写测试用例
- 15:07 功能 #2833 (已解决): Ford_SWER_0073_0004：LDM Configuration data storage mechanism
- 编写测试用例
- 15:06 功能 #2830 (已解决): Ford_SWER_0073_0001：LDM Data Configuration definition
- 15:04 功能 #2724 (已解决): Ford_SWER_0060_0008：LIN Bus Failures- report/status frame
- 15:03 功能 #2721 (已解决): Ford_SWER_0060_0007：LIN Bus Failures- Other wires
- 15:03 功能 #2718 (已解决): Ford_SWER_0060_0006：LIN Bus Failures- Bus Wiring Short to Battery Rcv
- 15:02 功能 #2717 (已解决): Ford_SWER_0060_0005：LIN Bus Failures- Bus Wiring Short to Battery
- 15:02 功能 #2716 (已解决): Ford_SWER_0060_0004：LIN Bus Failures- Bus Wiring Short to Ground Rcv
- 15:02 功能 #2715 (已解决): Ford_SWER_0060_0003：LIN Bus Failures- Bus Wiring Short to Ground
- 15:01 功能 #2714 (已解决): Ford_SWER_0060_0002：LIN Bus Failures-LDM Power Loss Rcv
- 14:59 功能 #2713 (已解决): Ford_SWER_0060_0001：LIN Bus Failures-LDM Power Loss
- 14:57 功能 #3010 (已关闭): Ford_SYSR: 软件命名规范
- 软件版本号分为Bootloader（B号）、APP（A号）均由三部分组成：
|说明|零件号|版本号|小版本号|
|Bootloader范例|SW0002894|B001|01|
|APP范例|SW0002890|A001|01|... - 14:56 功能 #2848 (反馈): Ford_SWER_0070_0003：How the Vehicle Operation Load Sequencing command is applied
- 14:29 功能 #2848: Ford_SWER_0070_0003：How the Vehicle Operation Load Sequencing command is applied
- TBD
- 14:55 功能 #2845 (反馈): Ford_SWER_0070_0002：The Vehicle Operation Load Sequencing command and functional correspondence
- 14:28 功能 #2845: Ford_SWER_0070_0002：The Vehicle Operation Load Sequencing command and functional correspondence
- TBD
- 14:55 功能 #3009 (已关闭): Ford_SWER_003x_0002：Welcome/Frawell for App
- App read the value of “Embrace_Delay_Welcome/Farewell_cfg”
It represents the time the LDM shall begin the fade after... - 14:55 功能 #2835 (反馈): Ford_SWER_0070_0001：VO_Load_Seq 0x07
- 14:28 功能 #2835: Ford_SWER_0070_0001：VO_Load_Seq 0x07
- TBD
- 14:53 功能 #2897 (反馈): Ford_SWER_0033_0001：Cornering Activation
- 14:53 功能 #2838 (已解决): Ford_SWER_0072_0001：Node Lighting Module Configuration
- 编写测试用例
- 14:51 功能 #3008 (已关闭): Ford_SWER_003x_0001：Welcome/Frawell for dataset
- ‘Embrace_Delay_Welcome_cfg’ can be seleted in the dataset
“Embrace_Delay_Welcome/Farewell_cfg”parameter definition:... - 14:42 功能 #2811 (已解决): Ford_SWER_0071_0007：APINFO0 bit map
- 编写测试用例
- 14:40 功能 #2800 (已解决): Ford_SWER_0071_0006：APINFO0 should be set to zero in all reported status
- 编写测试用例
- 14:39 功能 #2798 (已解决): Ford_SWER_0071_0005：APINFOx should follow Ford Standards
- 编写测试用例
- 14:38 功能 #2797 (已解决): Ford_SWER_0071_0004：All nodes are required to report Error Status
- 编写测试用例
- 14:32 功能 #2785 (已解决): Ford_SWER_0071_0001：Data format for first byte of LIN communication
- 编写测试用例
- 14:27 功能 #2591: Ford_SYSR：FS_REQ0070_V2 BCM EEL VO Load Sequencing
- TBD
- 14:23 功能 #2882 (已解决): Ford_SWER_0069_0004：The node that should be set to the 0x00
- 编写测试用例
- 14:23 功能 #2880 (已解决): Ford_SWER_0069_0003：LowBeam_Outage_Status feedback that the output of the LDM is faulty
- 编写测试用例
- 14:21 功能 #2867 (已解决): Ford_SWER_0069_0002：LDM_Load provide extended Load Fault Identification
- 编写测试用例
- 14:21 功能 #2820 (已解决): Ford_SWER_0069_0001：BCM EEL LDM Node Status Report Frame
- 编写测试用例
- 14:12 功能 #2855 (已解决): Ford_SWER_0068_0002：Exterior Lighting Functional Description
- 编写测试用例
- 14:11 功能 #2854 (已解决): Ford_SWER_0068_0001：The main lighting signal
- 编写测试用例
- 13:52 功能 #2809 (已解决): Ford_SWER_0067_0002：Description of the second frame of data
- 编写测试用例
- 13:51 功能 #2805 (已解决): Ford_SWER_0067_0001：the second frame from the BCM 0x01
- 编写测试用例
- 13:50 功能 #2799 (已解决): Ford_SWER_0066_0002：Description of the first frame of data
- 编写测试用例
- 13:49 功能 #2772 (已解决): Ford_SWER_0066_0001：the first frame from the BCM 0x00
- 编写测试用例
- 13:47 功能 #2860 (已解决): Ford_SWER_0065_0001：Information
- 编写测试用例
- 13:46 功能 #2768 (已解决): Ford_SWER_0064_0002：After each command frame, the BCM processes the node frames
- 编写测试用例
- 13:45 功能 #2765 (已解决): Ford_SWER_0064_0001：The master node sends it in a loop
- 编写测试用例
- 13:44 功能 #2729 (已解决): Ford_SWER_0063_0001：LDF
- 编写测试用例
- 13:42 功能 #2741 (已解决): Ford_SWER_0062_0005：LDM diagnostic with test command——Write MEC
- 编写测试用例
- 13:42 功能 #2740 (已解决): Ford_SWER_0062_0004：LDM diagnostic with test command——Read Daataset 数据
- 编写测试用例
- 13:41 功能 #2739 (已解决): Ford_SWER_0062_0003：LDM diagnostic with test command——Read SW Version
- 编写测试用例
- 13:40 功能 #2738 (已解决): Ford_SWER_0062_0002：LDM diagnostic with test command——Read EDF2
- snapshot未实施，预计A002.0添加，待确定
- 13:39 功能 #2737 (已解决): Ford_SWER_0062_0001：LDM diagnostic with test command——Read EDF1
- 编写测试用例
- 13:38 功能 #2736 (已解决): Ford_SWER_0061_0005：Failure Recover strategy—— Power Reset
- 编写测试用例
- 13:37 功能 #2735 (已解决): Ford_SWER_0061_0004：Failure Recover strategy—— LIN Rcv
- 编写测试用例
- 13:36 功能 #2734 (已解决): Ford_SWER_0061_0003：Failure Recover strategy——Buck Flt Rcv
- 编写测试用例
- 13:36 功能 #2733 (已解决): Ford_SWER_0061_0002：Failure Recover strategy——RBIN/NTC Rcv
- 编写测试用例
- 13:35 功能 #2732 (已解决): Ford_SWER_0061_0001：Failure Recover strategy——LED Rcv
- 编写测试用例
- 13:34 功能 #2731 (已解决): Ford_SWER_006x_0004：LB hardwire activate lost failure - LB Hardwire ON + Headlamp_Low_Beams_Out Off
- 编写测试用例
- 13:34 功能 #2730 (已解决): Ford_SWER_006x_0003：LB hardwire inactive and Headlamp_Low_Beams_Out ,LB shall OFF
- 编写测试用例
- 13:33 功能 #2728 (已解决): Ford_SWER_006x_0002：If either LB hardwire status and Headlamp_Low_Beams_Out ON status is ON,then LB Function shall ON
- 编写测试用例
- 13:32 功能 #2727 (已解决): Ford_SWER_006x_0001：LDM shall report the LB Outage while LB hardwire status and Headlamp_Low_Beams_Out ON status mismatch within1000ms
- 13:18 功能 #2996 (已解决): Ford_SWER：FS_REQ0018&REQ0020_0006 High Beam LDM standard ramping for dataset
- 13:15 功能 #3006 (已关闭): Ford_SWER_0034_0002：Right side light activation mode
- 右侧sm灯的激活/停用由 BCM LIN 命令 “Position_Park_Right_Cmd”触发，该命令控制右侧节点的sm灯，其中0x00为停用sm灯，0x01为激活sm灯。
The activation/deactivati... - 13:13 功能 #2670: Ford_SWER_0015_0011：Low Side Driver 1 and 2 usage Configuration(LSD Duty Cycle)
- 客户矫正需求
- 13:11 功能 #3005 (已关闭): Ford_SYSR：FS_REQ003x_V1 Welcome/Frawell
- The LDM shall support Fade on/off animation, ‘Embrace_Delay_Welcome_cfg/Embrace_Delay_farewell_cfg’ describes the tim...
导出 Atom