活动 - 涛陆 - Redmine

涛陆的活动

从 2024-10-26 到 2024-11-04

18:02 FORD LDM Localization 功能 #2817: Ford_SWER_0080_0003:Self-Test“Cycle all” 不报故障: 目前项目不需要，下一版开发涛陆
18:01 FORD LDM Localization 功能 #2814: Ford_SWER_0080_0002:Self-Test “CycleAll” 指令LDM响应内容: 目前项目不需求，迭代开发涛陆
17:57 FORD LDM Localization 功能 #3012 (新建): Ford_SWER_0079_0003:Software self-test function: Software shall get the information from Self-Test Command Frame and light on the corresponding channels. 涛陆
17:53 FORD LDM Localization 功能 #2910: Ford_SWER_0079_0002:Self-Test Command Frame Signal define: 目前不需要，下一阶段开发涛陆
17:53 FORD LDM Localization 功能 #2909: Ford_SWER_0079_0001:Self Test command Frame: 目前不需要，下一阶段开发涛陆
17:51 FORD LDM Localization 功能 #3011 (已解决): Ford_SWER_0078_0003： Part Number Value: 软件已完成，提交给测试涛陆
17:49 FORD LDM Localization 功能 #3011 (已关闭): Ford_SWER_0078_0003： Part Number Value: Software save PN “P2RB-13B626-AA”in the const and report PN by receiving corrosping ID. 涛陆
17:51 FORD LDM Localization 功能 #2889 (已解决): Ford_SWER_0078_0001：Part Number Report: 软件已完成，提交给测试涛陆
17:50 FORD LDM Localization 功能 #2885 (已解决): Ford_SWER_0078_0002： Unused bytes handling: 软件已完成，提交给测试涛陆
17:43 FORD LDM Localization 功能 #2599: Ford_SYSR：FS_REQ0078_V1 LIN Part Number Reporting: delete example 涛陆

20:23 FORD LDM Localization 功能 #2760 (已关闭): Ford_SWER_0044_0002： FAN Functional self-test when power on for app: App:
The software needs to determine whether a fan self-test is required and the duration of the self-test based on ... 涛陆
20:20 FORD LDM Localization 功能 #2759 (已关闭): Ford_SWER_0044_0001： FAN Functional self-test when power on for dataset: Dataset:
‘FanRunTime_OnPwr_cfg’ definition:
• 0x00: 0s
• 0x01: 20s
• 0x02: 40s
• 0x03: 60s 涛陆
20:13 FORD LDM Localization 功能 #2758 (已关闭): Ford_SWER_0045_0003：NTC Temperatur Triggle Fan For Dataset: ‘Fan_Activation_Temp_cfg’ definition:
• Range: 50℃ to 100℃
• Resolution: 5℃ 涛陆
20:12 FORD LDM Localization 功能 #2757 (已关闭): Ford_SWER_0045_0002：NTC Source Triggle Fan For Dataset: Dataset:
If ‘FAN_Activation_Trigger_cfg’ = 0x02 which means FAN will be activated when the temperature is more than ... 涛陆
20:11 FORD LDM Localization 功能 #2756 (已关闭): Ford_SWER_0045_0001：Activation of the Fan For Dataset: Dataset:
The activation of FAN can be configured by the parameter ‘FAN_Activation_Trigger_cfg’.
• 0x00: No fan
• 0... 涛陆
19:59 FORD LDM Localization 功能 #2755 (已关闭): Ford_SWER_0046_0002：Fan Failure Detection Of App: the software will sample the feedback line(C16) of the fan.
|State of the Fan Feedback Line |AD Range |Operati... 涛陆
19:50 FORD LDM Localization 功能 #2754 (已关闭): Ford_SWER_0046_0001：Fan Failure Detection Of Dataset: Dataset has‘Fan_Outage_Detect_cfg’to determine either perform full stall/outage detection or not.
‘Fan_Outage_Detect... 涛陆
19:18 FORD LDM Localization 功能 #2753 (已关闭): Ford_SWER_0047_0001：LED Thermal Derating Peak Current morn than 150mA: If the current derating is more than 150mA,the LDM shall control the LED junction temperature by controlling the curr... 涛陆
19:09 FORD LDM Localization 功能 #2752 (已关闭): Ford_SWER_0048_0002：Output Channel Thermal Monitoring NTC Source Select For App: App：
Reduce or not reduce power by obtaining information from 'Channelx_NTC_Source_cfg' and combining it with the co... 涛陆
19:03 FORD LDM Localization 功能 #2751 (已关闭): Ford_SWER_0048_0001：Output Channel Thermal Monitoring NTC Source Select For Dataset: Dataset：
‘Channelx_NTC_Source_cfg’ definition:
• 0x00: NOT USED
• 0x01: NTC1
• 0x02: NTC2
• 0x03: NTC3
• 0x04: ... 涛陆
18:56 FORD LDM Localization 功能 #2750 (已关闭): Ford_SWER_0049_0002：Output Thermal Derating Curve For App: APP:
1.软件初始化时候计算每两个降功率点之间的斜率
2.任务循环里面滤波并计算当前温度值，判断当前温度处于哪一档区间，用该档的斜率计算目标降功率的值
3.当前输出降功率值和目标降功率的值不一致的时候做缓慢变化
4.如果降... 涛陆
18:53 FORD LDM Localization 功能 #2749 (已关闭): Ford_SWER_0049_0001：Output Thermal Derating Curve Dataset Configure: Dataset：
NTC derating temperature range and resolution setting:
‘CHx_NTC_TempDerate1_cfg’: should always be -40℃ an... 涛陆
18:40 FORD LDM Localization 功能 #2748 (已关闭): Ford_SYER_0050_0006：LDM Internal Thermal Derating Hysteresis: Derated functions shall recover to performance of the previous range with a 5°C hysteresis.
模块温度降功率回到上一个区间的状态需要增加5℃的回滞涛陆
18:38 FORD LDM Localization 功能 #2747 (已关闭): Ford_SYER_0050_0005：LDM Internal Thermal Derating for SBL: If LDM Internal temperature is over 125℃，SBL target Derating value should be 20%.
If LDM Internal temperature is ove... 涛陆
18:36 FORD LDM Localization 功能 #2746 (已关闭): Ford_SYER_0050_0004：LDM Internal Thermal Derating for DRL/PL: If LDM Internal temperature is over 135℃，DRL/PL target Derating value should be 20%.
If LDM Internal temperature is ... 涛陆
18:32 FORD LDM Localization 功能 #2744 (已关闭): Ford_SYER_0050_0003：LDM Internal Thermal Derating for Turn Indicator: If LDM Internal temperature is over 145℃，Turn target Derating value should be 20%.
If LDM Internal temperature is un... 涛陆
18:29 FORD LDM Localization 功能 #2743 (已关闭): Ford_SYER_0050_0002：LDM Internal Thermal Derating for HB: If LDM Internal temperature is over 125℃，HB target Derating value should be 20%.
If LDM Internal temperature is over... 涛陆
18:24 FORD LDM Localization 功能 #2742 (已关闭): Ford_SYER_0050_0001：LDM Internal Thermal Derating for Foreground LB: start derating at 135℃ 100% to 145℃ 20% (linear) 涛陆

Redmine

涛陆的活动

项目

一般

简介

Redmine

活动

涛 陆 的活动

2024-11-04

2024-11-01

2024-10-31

2024-10-30

2024-10-29

2024-10-28

涛陆的活动