活动 - 培源左 - Redmine

活动

10 天，最多至

用户

培源左的活动

从 2024-10-28 到 2024-11-06

2024-10-29

16:23 FORD LDM Localization 功能 #2623: Ford_SWER_0010_0005：Channel 1 Failsafe Mode(N-1 Failure Detection): 更新详述培源左
16:15 FORD LDM Localization 功能 #2631: Ford_SWER_0007_0001: 转向灯触发方式: 更新详述培源左
15:05 FORD LDM Localization 功能 #2631 (已解决): Ford_SWER_0007_0001: 转向灯触发方式: 培源左
15:13 FORD LDM Localization Bug #2856: dataset问题: 此Bug将在AC版本上更新培源左
15:11 FORD LDM Localization 功能 #2872 (已解决): Ford_SWER_0030_0001：DRL Response to Flash-To-Pass Activation For Dataset: 培源左
15:11 FORD LDM Localization 功能 #2878 (已解决): Ford_SWER_0028_0001：DRL Response to Low Beam outage for dataset: 培源左
15:11 FORD LDM Localization 功能 #2865 (已解决): Ford_SWER_0026_0002：DRL value for dataset: 培源左
15:10 FORD LDM Localization 功能 #2825 (已解决): Ford_SWER_0024_0001: Turn Indicator Delay(Dataset Cfg): 培源左
11:46 FORD LDM Localization 功能 #2825 (已关闭): Ford_SWER_0024_0001: Turn Indicator Delay(Dataset Cfg): Dataset中需要能配置“TI_delay_time_Cfg”，并生成对应的数据。
(The Dataset must be able to configure TI_delay_time_Cfg and generate cor... 培源左
15:09 FORD LDM Localization 功能 #2875 (已解决): Ford_SWER_0023_0005：Turn Indicator Activation( Dataset “DRL_Combined_TI_cfg”& "DRL_TI_Control_cfg"): 培源左
14:24 FORD LDM Localization 功能 #2875 (已关闭): Ford_SWER_0023_0005：Turn Indicator Activation( Dataset “DRL_Combined_TI_cfg”& "DRL_TI_Control_cfg"): Dataset中“DRL_Combined_TI_cfg”= 0x01时，“DRL_TI_Control_cfg”配置项更新为以下选项：
(When DRL_Combined_TI_cfg = 0x01 in the Dataset... 培源左
15:09 FORD LDM Localization 功能 #2841 (已解决): Ford_SWER_0022_0001：High Beam EEL Front Fog Activation Reaction for App: 培源左
15:08 FORD LDM Localization 功能 #2827 (已解决): Ford_SWER_0020_0002：High Beam LDM standard ramping -‘HB_Ramping_method_cfg’: 培源左
15:07 FORD LDM Localization 功能 #2826 (已解决): Ford_SWER_0020_0001：High Beam LDM standard ramping: 培源左
15:06 FORD LDM Localization 功能 #2819 (已解决): Ford_SWER_0016_0016:PWM output configuration(Dataset PWM DRL1/2 Duty Cycle): 培源左
11:22 FORD LDM Localization 功能 #2819 (已关闭): Ford_SWER_0016_0016:PWM output configuration(Dataset PWM DRL1/2 Duty Cycle): Dataset中若“PWMx_Function_Assign_cfg”配置为0x00/0x04/0x05，则对应PWM通道的“PWMx_Target_Duty_Cycle_cfg”不可被配置，并生成默认值0x00。
(If PWMx... 培源左
15:05 FORD LDM Localization 功能 #2630 (已解决): Ford_SWER_0006_0001: DRL/PO触发方式: 培源左
14:58 FORD LDM Localization 功能 #2892 (已关闭): Ford_SWER_0023_0008：Turn Indicator Activation(Two-part DRL cannot be used when DRL is combined with TI): 当“DRL_Combined_TI_cfg”为0x01时，Two-part DRL不能被启用。
(When "DRL_Combined_TI_cfg" is 0x01, the Two-part DRL cannot be enab... 培源左
14:42 FORD LDM Localization 功能 #2886 (已关闭): Ford_SWER_0023_0007：Turn Indicator Activation(Copy TI behavior alternating between ‘DRL_intensity_cfg’ and ‘ParkPos_Intensity_cfg’): 当软件读到“DRL_Combined_TI_cfg”= 0x01时，若“DRL_TI_Control_cfg ”配置为0x01时，则TI点亮时DRL渐变到PL亮度，TI熄灭时，再渐亮为DRL亮度。
(When the softwar... 培源左
14:38 FORD LDM Localization 功能 #2884 (已关闭): Ford_SWER_0023_0006：Turn Indicator Activation(Copy TI behavior alternating between DRL intensity and off): 当软件读到“DRL_Combined_TI_cfg”= 0x01时，若“DRL_TI_Control_cfg ”配置为0x00时，则TI和DRL交替闪烁。
(When the software reads "DRL_Combined... 培源左
14:12 FORD LDM Localization 功能 #2869 (已关闭): Ford_SWER_0023_0004：Turn Indicator Activation( “DRL_Combined_TI_cfg”): 软件读取到参数“DRL_Combined_TI_cfg”设置为1时，转动灯的激活也可以开启DRL，具体的表现以“DRL_TI_Control_cfg”配置项为准。
(When the software reads that the ... 培源左
13:56 FORD LDM Localization 功能 #2862 (已关闭): Ford_SWER_0023_0003：Turn Indicator Activation(“Turn_signal_Light_Cmd“ no impact): LIN接收信号中，“Turn_signal_Light_Cmd”信号会为其他功能提供转向灯使能信息。此信号对确定转向指示灯功能的实际状态没有影响。
(The‘Turn_signal_Light_Cmd’provides inform... 培源左
13:22 FORD LDM Localization 功能 #2849 (已关闭): Ford_SWER_0023_0002：Turn Indicator Activation(Turn signal working voltage judgment): 当转向电源（L/RF_Turn_Lamp_Ckt）等于或高于7V时转向灯点亮，低于7V时转向灯熄灭，转向灯熄灭时，转向灯电源需要等于或高于7.5V才能恢复到点亮状态。
(When the power supply (L/RF_Tur... 培源左
13:06 FORD LDM Localization 功能 #2846 (已关闭): Ford_SWER_0023_0001：Turn Indicator Activation(the definition of the operational state of the Turn Indicator): 软件需要能抓取BCM转向电源端（L/RF_Turn_Lamp_Ckt）的电压电平，改变转向指示灯工作状态。
(The software needs to be able to grab the voltage level of th... 培源左
12:38 FORD LDM Localization 功能 #2832 (进行中): Ford_SWER_0024_0002: Turn Indicator Delay(TI Delay Time): 培源左
12:28 FORD LDM Localization 功能 #2832 (已关闭): Ford_SWER_0024_0002: Turn Indicator Delay(TI Delay Time): 软件需要能识别Dataset配置项“TI_delay_time_Cfg”生成数据。在收到转向灯信号时，按照配置时间延时触发。
(The software must be able to identify data generated... 培源左
11:14 FORD LDM Localization 功能 #2815 (已关闭): Ford_SWER_0016_0015:PWM output configuration(APP PWM Follow Static Bending light): 若软件读取到“PWMx_Function_Assign_cfg”为0x10，则对应PWM通道关联Static Bending light功能，当收到Static Bending light功能指令时，PWM输出应立即从0%激活到对应的... 培源左
11:13 FORD LDM Localization 功能 #2813 (已关闭): Ford_SWER_0016_0014:PWM output configuration(APP PWM Follow Side Marker): 若软件读取到“PWMx_Function_Assign_cfg”为0x09，则对应PWM通道关联Side Marker功能，当收到Side Marker功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_... 培源左
11:11 FORD LDM Localization 功能 #2810 (已关闭): Ford_SWER_0016_0013:PWM output configuration(APP PWM Follow Cornering light): 若软件读取到“PWMx_Function_Assign_cfg”为0x08，对应PWM通道关联Cornering light功能，当收到Cornering light功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Targe... 培源左
11:09 FORD LDM Localization 功能 #2808 (已关闭): Ford_SWER_0016_0012:PWM output configuration(APP PWM Follow Front Fog): 若软件读取到“PWMx_Function_Assign_cfg”为0x07，则对应PWM通道关联Front Fog功能，当收到Front Fog功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycl... 培源左
11:08 FORD LDM Localization 功能 #2807 (已关闭): Ford_SWER_0016_0011:PWM output configuration(APP PWM Follow Licoln Lit Star): 若软件读取到“PWMx_Function_Assign_cfg”为0x06，则对应PWM通道关联Licoln Lit Star功能，当收到Licoln Lit Star功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Targ... 培源左
11:05 FORD LDM Localization 功能 #2806 (已关闭): Ford_SWER_0016_0010:PWM output configuration(APP PWM Follow DRL2): 若软件读取到“PWMx_Function_Assign_cfg”为0x05，对应PWM通道关联DRL2功能，follow DRL2功能。若收到DRL指令时，对应PWM通道按照“PWM4_Target_Duty_Cycle_cfg”占空... 培源左
11:03 FORD LDM Localization 功能 #2803 (已关闭): Ford_SWER_0016_0009:PWM output configuration(APP PWM Follow DRL1): 若软件读取到“PWMx_Function_Assign_cfg”为0x04，对应PWM通道关联DRL1功能，follow DRL1功能。若收到DRL指令时，对应PWM通道按照“PWM4_Target_Duty_Cycle_cfg”占空... 培源左
10:40 FORD LDM Localization 功能 #2792 (已关闭): Ford_SWER_0016_0008:PWM output configuration(APP PWM Follow TI): 若软件读取到“PWMx_Function_Assign_cfg”为0x03，则对应PWM通道关联TI/Hazard功能，当收到TI/Hazard功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycl... 培源左
10:38 FORD LDM Localization 功能 #2789 (进行中): Ford_SWER_0016_0007:PWM output configuration(APP PWM Follow HB): 培源左
10:37 FORD LDM Localization 功能 #2789 (已关闭): Ford_SWER_0016_0007:PWM output configuration(APP PWM Follow HB): 若软件读取到“PWMx_Function_Assign_cfg”为0x02，则对应PWM通道关联HB功能，当收到HB功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycle_cfg”占空比。
(I... 培源左
10:36 FORD LDM Localization 功能 #2788 (已关闭): Ford_SWER_0016_0006:PWM output configuration(APP PWM Follow LB): 若软件读取到“PWMx_Function_Assign_cfg”为0x01，则对应PWM通道关联LB功能，当收到LB功能指令时，PWM输出应立即从0%激活到对应的“PWMx_Target_Duty_Cycle_cfg”占空比。
(I... 培源左
10:31 FORD LDM Localization 功能 #2786 (已关闭): Ford_SWER_0016_0005:PWM output configuration(APP PWM unused): 若软件读取到“PWMx_Function_Assign_cfg”为0x00，则对应PWM通道不会被启用。
(If the value of PWMx_Function_Assign_cfg is 0x00, the correspo... 培源左
10:27 FORD LDM Localization 功能 #2779 (进行中): Ford_SWER_0016_0004:PWM output configuration(APP PWM Duty Cycle): 培源左
10:24 FORD LDM Localization 功能 #2779 (已关闭): Ford_SWER_0016_0004:PWM output configuration(APP PWM Duty Cycle): 软件需要能识别Dataset生成的数据中4个PWM通道对应配置项“PWMx_Target_Duty_Cycle_cfg”的值。
(The software must be able to identify the value of ... 培源左
10:26 FORD LDM Localization 功能 #2778 (进行中): Ford_SWER_0016_0003:PWM output configuration(APP PWM Function): 培源左
10:22 FORD LDM Localization 功能 #2778 (已关闭): Ford_SWER_0016_0003:PWM output configuration(APP PWM Function): Dataset中可以配置四个PWM通道绑定的触发功能，并配置触发时输出的PWM百分比。
(The software must be able to identify the values of PWMx_Function_Assig... 培源左
10:25 FORD LDM Localization 功能 #2774 (已解决): Ford_SWER_0016_0002:PWM output configuration(Dataset PWM Duty Cycle): 培源左
10:11 FORD LDM Localization 功能 #2774 (已关闭): Ford_SWER_0016_0002:PWM output configuration(Dataset PWM Duty Cycle): Dataset 应该可以分别配置4个PWM通道的占空比。
(The Dataset should be able to configure duty cycles for each of the four PWM channels.... 培源左
10:24 FORD LDM Localization 功能 #2773 (已解决): Ford_SWER_0016_0001:PWM output configuration(Dataset PWM Function): 培源左
10:02 FORD LDM Localization 功能 #2773 (已关闭): Ford_SWER_0016_0001:PWM output configuration(Dataset PWM Function): Dataset 应该可以将4个PWM对应的“PWMx_Function_Assign_cfg”配置为一下选项并生成相应数据。
(The Dataset should be able to set PWMx_Function_Assi... 培源左
09:49 FORD LDM Localization 功能 #2670 (已解决): Ford_SWER_0015_0011：Low Side Driver 1 and 2 usage Configuration(LSD Duty Cycle): 培源左
09:49 FORD LDM Localization 功能 #2771 (已解决): Ford_SWER_0015_0012：Low Side Driver 1 and 2 usage Configuration(IGN Read): 培源左
09:49 FORD LDM Localization 功能 #2771 (已关闭): Ford_SWER_0015_0012：Low Side Driver 1 and 2 usage Configuration(IGN Read): APP需要可以读取IGN信号，并判断其状态，是否为RUN，START状态。
(The APP needs to be able to read IGN signals and determine whether they are i... 培源左
09:43 FORD LDM Localization 功能 #2669 (已解决): Ford_SWER_0015_0010：Low Side Driver 1 and 2 usage Configuration(HB/FTP Base IGN): 培源左
09:43 FORD LDM Localization 功能 #2668 (进行中): Ford_SWER_0015_0009：Low Side Driver 1 and 2 usage Configuration(DRL2 clash): 培源左
09:43 FORD LDM Localization 功能 #2666 (进行中): Ford_SWER_0015_0008：Low Side Driver 1 and 2 usage Configuration(SBL): 培源左
09:43 FORD LDM Localization 功能 #2664 (已解决): Ford_SWER_0015_0007：Low Side Driver 1 and 2 usage Configuration(DRL2): 培源左
09:42 FORD LDM Localization 功能 #2663 (已解决): Ford_SWER_0015_0006：Low Side Driver 1 and 2 usage Configuration(HB): 培源左
09:42 FORD LDM Localization 功能 #2662 (已解决): Ford_SWER_0015_0005：Low Side Driver 1 and 2 usage Configuration(LB): 培源左
09:41 FORD LDM Localization 功能 #2661 (已解决): Ford_SWER_0015_0004：Low Side Driver 1 and 2 usage Configuration(Not used): 培源左
09:40 FORD LDM Localization 功能 #2658 (已解决): Ford_SWER_0015_0003：Low Side Driver 1 and 2 usage Configuration(Dataset LSD cycle): 培源左
09:39 FORD LDM Localization 功能 #2656 (已解决): Ford_SWER_0015_0002：Low Side Driver 1 and 2 usage Configuration(Dataset DRL2 clash): 培源左
09:39 FORD LDM Localization 功能 #2655 (已解决): Ford_SWER_0015_0001：Low Side Driver 1 and 2 usage Configuration(Dataset_Lsd_usage): 培源左
09:36 FORD LDM Localization 功能 #2770 (进行中): Ford_SWER_0014_0008：Low Side Driver 1 and 2 Channel Configuration(APP Clash): 培源左
09:36 FORD LDM Localization 功能 #2770 (已关闭): Ford_SWER_0014_0008：Low Side Driver 1 and 2 Channel Configuration(APP Clash): 软件中两个LSD不能连接同一个通道。(Two LSDS in the software cannot connect to the same channel.) 培源左
09:33 FORD LDM Localization 功能 #2654 (进行中): Ford_SWER_0014_0006：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel4): 培源左
09:32 FORD LDM Localization 功能 #2653 (进行中): Ford_SWER_0014_0005：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel3): 培源左
09:32 FORD LDM Localization 功能 #2652 (进行中): Ford_SWER_0014_0004：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel2): 培源左
09:32 FORD LDM Localization 功能 #2648 (进行中): Ford_SWER_0014_0003：Low Side Driver 1 and 2 Channel Configuration(LSD assignment Channel1): 培源左
09:31 FORD LDM Localization 功能 #2769 (已解决): Ford_SWER_0014_0007：Low Side Driver 1 and 2 Channel Configuration(Dataset Clash): 培源左
09:31 FORD LDM Localization 功能 #2769 (已关闭): Ford_SWER_0014_0007：Low Side Driver 1 and 2 Channel Configuration(Dataset Clash): Dataset中“LSD1/2_channel_assignment_cfg”配置项，两个LSD不被允许配置为同一通道。若配置为同一通道，最后一步操作将会撤回，并报错提醒。
(In the Dataset, the LSD1/2_c... 培源左
09:27 FORD LDM Localization 功能 #2647 (进行中): Ford_SWER_0014_0002：Low Side Driver 1 and 2 Channel Configuration(LSD Not used): 培源左
09:26 FORD LDM Localization 功能 #2646 (已解决): Ford_SWER_0014_0001：Low Side Driver 1 and 2 Channel Configuration(Dataset Cfg): 培源左

2024-10-28

16:58 FORD LDM Localization 功能 #2645 (已解决): Ford_SWER_0013_0006：Channel 2 to 4 Functional Configuration（TI）: 培源左
16:57 FORD LDM Localization 功能 #2644 (已解决): Ford_SWER_0013_0005：Channel 2 to 4 Functional Configuration（DRL）: 培源左
16:56 FORD LDM Localization 功能 #2643 (已解决): Ford_SWER_0013_0004：Channel 2 to 4 Functional Configuration（HB）: 培源左
16:55 FORD LDM Localization 功能 #2642 (已解决): Ford_SWER_0013_0003：Channel 2 to 4 Functional Configuration（LB）: 培源左
16:54 FORD LDM Localization 功能 #2641 (已解决): Ford_SWER_0013_0002：Channel 2 to 4 Functional Configuration（Not used）: 培源左
16:52 FORD LDM Localization 功能 #2640 (已解决): Ford_SWER_0013_0001：Channel 2 to 4 Functional Configuration（Dataset配置）: 培源左
16:42 FORD LDM Localization 功能 #2639 (已解决): Ford_SWER_0011_0007：Turn Indicator Failsafe Mode（TI Feedback）: 培源左
16:41 FORD LDM Localization 功能 #2638 (已关闭): Ford_SWER_0011_0006：Turn Indicator Failsafe Mode（Active Load Fault Reporting via LIN）: 培源左
16:39 FORD LDM Localization 功能 #2637 (已解决): Ford_SWER_0011_0005：Turn Indicator Failsafe Mode（N-1 Failure Detection）: 培源左
16:34 FORD LDM Localization 功能 #2636 (已解决): Ford_SWER_0011_0004：Turn Indicator Failsafe Mode（Channel Open/Short Detection）: 培源左
16:33 FORD LDM Localization 功能 #2635 (已解决): Ford_SWER_0011_0003：Turn Indicator Failsafe Mode（TI Bin Sense）: 培源左
16:30 FORD LDM Localization 功能 #2634 (已解决): Ford_SWER_0011_0002：Turn Indicator Failsafe Mode（TI Thermal Derating）: 培源左
16:29 FORD LDM Localization 功能 #2633 (已解决): Ford_SWER_0011_0001：Turn Indicator Failsafe Mode（TI Light Output）: 培源左
16:20 FORD LDM Localization 功能 #2629 (进行中): Ford_SWER_0010_0009：Channel 1 Failsafe Mode(Channels 2-4 Assigned to LB): 培源左
16:18 FORD LDM Localization 功能 #2627 (进行中): Ford_SWER_0010_0008：Channel 1 Failsafe Mode(Light Connected to CH1 Low Side Driver): 培源左
16:17 FORD LDM Localization 功能 #2626 (进行中): Ford_SWER_0010_0007：Channel 1 Failsafe Mode(Static Bending): 培源左
15:44 FORD LDM Localization 功能 #2624 (进行中): Ford_SWER_0010_0006：Channel 1 Failsafe Mode(Active Load Fault Reporting via LIN): 培源左
15:43 FORD LDM Localization 功能 #2623 (进行中): Ford_SWER_0010_0005：Channel 1 Failsafe Mode(N-1 Failure Detection): 培源左
15:40 FORD LDM Localization 功能 #2621 (已解决): Ford_SWER_0010_0004：Channel 1 Failsafe Mode(Channel Open/Short Detection): 培源左
15:39 FORD LDM Localization 功能 #2620 (已解决): Ford_SWER_0010_0003：Channel 1 Failsafe Mode(LB Bin Sense): 培源左
15:37 FORD LDM Localization 功能 #2619 (已解决): Ford_SWER_0010_0002：Channel 1 Failsafe Mode(LB Thermal Derating): 培源左
15:32 FORD LDM Localization 功能 #2695 (已关闭): Ford_SWER_0010_0010：Channel 1 Failsafe Mode(BCM failsafe mode): 软件中需要周期性识别主电源（Input Channel2）是否存在，若丢失主电源(Input channel 2 = LOW)，且此时Input Channel1和Input Channel3任一个存在，或同时存在，则进入BCM fa... 培源左
15:07 FORD LDM Localization 功能 #2617 (已解决): Ford_SWER_0010_0001：Channel 1 Failsafe Mode(LB Light Output): 培源左
14:46 FORD LDM Localization 功能 #2677 (已解决): Ford_SWER_0009_0001：Channel 1 output Assignment(Dataset Channel 1 combine LB): 已完成培源左
14:41 FORD LDM Localization 功能 #2677 (已关闭): Ford_SWER_0009_0001：Channel 1 output Assignment(Dataset Channel 1 combine LB): Dataset中Output Channel1功能配置固定为LB不可修改。
(The configuration of the Output Channel1 function in Dataset is fixed to LB a... 培源左
14:45 FORD LDM Localization 功能 #2678 (已关闭): Ford_SWER_0009_0002：Channel 1 output Assignment(APP Channel 1 combine LB): 软件中Output Channel1默认绑定LB功能输出，不能通过配置改变。
(Output Channel1 in the software is bound to the LB output by default and can... 培源左
13:45 FORD LDM Localization 功能 #2670 (已关闭): Ford_SWER_0015_0011：Low Side Driver 1 and 2 usage Configuration(LSD Duty Cycle): APP读取Dataset的生成数据，相应LSD通道按照“LSD1/2_ Duty_Cycle_cfg”数据输出占空比。
(The APP reads the generated data of the Dataset, and th... 培源左
13:06 FORD LDM Localization 功能 #2669 (已关闭): Ford_SWER_0015_0010：Low Side Driver 1 and 2 usage Configuration(HB/FTP Base IGN): APP读取Dataset数据，若存在“LSD1/2_usage_cfg”为0x02，则收到HB/FTP命令时，若IGN处于运行或启动状态时，才能激活相应的通道输出。
(When the APP reads Dataset data,... 培源左
12:53 FORD LDM Localization 功能 #2668 (已关闭): Ford_SWER_0015_0009：Low Side Driver 1 and 2 usage Configuration(DRL2 clash): DRL2只能分配给一个LSD通道。
(DRL2 can only be assigned to one LSD channel.) 培源左
12:50 FORD LDM Localization 功能 #2666 (已关闭): Ford_SWER_0015_0008：Low Side Driver 1 and 2 usage Configuration(SBL): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x04，则对应LSD关联SBL功能。
当收到SBL信号时，对应LSD应当被激活，并按照设定方式输出。
(The APP reads the genera... 培源左
12:48 FORD LDM Localization 功能 #2664 (已关闭): Ford_SWER_0015_0007：Low Side Driver 1 and 2 usage Configuration(DRL2): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x03，则对应LSD关联DRL2功能。
当收到DRL信号时，对应LSD应当被激活，并输出对应“LSDx_ Duty_Cycle_cfg”占空比；
当收到... 培源左
12:46 FORD LDM Localization 功能 #2663 (已关闭): Ford_SWER_0015_0006：Low Side Driver 1 and 2 usage Configuration(HB): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x02，则对应LSD关联HB功能。
当收到HB信号时，对应LSD应当被激活，并按照设定方式输出。
(The APP reads the generate... 培源左
12:44 FORD LDM Localization 功能 #2662 (已关闭): Ford_SWER_0015_0005：Low Side Driver 1 and 2 usage Configuration(LB): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x01，则对应LSD关联LB功能。
当收到LB信号时，对应LSD应当被激活，并按照设定方式输出。
(The APP reads the generate... 培源左
12:40 FORD LDM Localization 功能 #2661 (已关闭): Ford_SWER_0015_0004：Low Side Driver 1 and 2 usage Configuration(Not used): APP读取Dataset的生成数据，若“LSD1/2_usage_cfg”为0x00，则对应LSD未关联功能
(The APP reads the generated data of the Dataset. If LSD1/2_u... 培源左
11:07 FORD LDM Localization 功能 #2658 (已关闭): Ford_SWER_0015_0003：Low Side Driver 1 and 2 usage Configuration(Dataset LSD cycle): Dataset 可以通过“LSD1/2_ Duty_Cycle_Cfg”配置LSD1/2占空比。
(Dataset Can set the LSD1/2 duty ratio using LSD1/2_Duty_Cycle_Cfg.... 培源左
10:55 FORD LDM Localization 功能 #2656 (已关闭): Ford_SWER_0015_0002：Low Side Driver 1 and 2 usage Configuration(Dataset DRL2 clash): Dataset 中“LSD1/2_usage_cfg”应该只有一个LSD可以配置为“DRL2”，若两项都配置为“DRL2”时，操作将被撤回，并报错。
(Only one LSD in the Dataset LSD1/2_usage... 培源左

导出 Atom

项目

一般

简介

Redmine

活动

培源左的活动

2024-11-01

2024-10-31

2024-10-30

2024-10-29

2024-10-28

项目

一般

简介

Redmine

活动

培源 左 的活动

2024-11-01

2024-10-31

2024-10-30

2024-10-29

2024-10-28

培源左的活动