功能 #2550
由 玉洁 金 更新于 大约一年 之前
If the DRL is active, and flash to pass signal is received via LIN and IGN is either run or start, the LDM shall follow the parameter ‘DRL_ON_FTP_cfg’.
‘DRL_ON_FTP_cfg’ parameter definition:
• 0x00: FTP has no impact on DRL
• 0x01: DRL should switch from ‘DRL_Intensity’ ‘DRL_Intensity_cfg’ to ‘ParkPos_Intensity_cfg’ when BCM LIN command ‘FTP_Status’ transation from 0x00 to0x01. = 0x01. If DRL is off, it should stay at off.
After the ‘FTP_Status’ transation from 0x01 to 0x00, the DRL should switch from ‘ParkPos_Intensity_cfg’ will swtich to ‘DRL_Intensity’. If DRL is off, it should stay at off. the requested intensity.
返回