项目

一般

简介

功能 #2550

涛 陆 更新于 8 个月 之前

If the DRL is active, and flash to pass signal is received via LIN and IGN is either run or start, the LDM shall follow the parameter ‘DRL_ON_FTP_cfg’.  
 ‘DRL_ON_FTP_cfg’ parameter definition: 
 • 	 0x00: FTP has no impact on DRL 
 • 	 0x01: DRL should switch fade from ‘DRL_Intensity_cfg’ to ‘ParkPos_Intensity_cfg’ when BCM LIN command ‘FTP_Status’ = 0x01. If DRL is off, it should stay at off.  

 After the ‘FTP_Status’ transation from 0x01 to 0x00, the DRL will swtich fade to the requested intensity. intensity according to ‘DRL_activation_time_after_deact_cfg’.  

返回