功能 #2633
由 培源 左 更新于 8 个月 之前
软件进入到Failsafe Mode，且识别到有“TI 软件识别到只有“TI Power supply Channel”(L/RF_Turn_Lamp_Ckt)使能，同时读取到Dataset中“TI_POWER_Source_CFG”配置为0x01,“Channel2/3/4_usage_cfg”配置为0x04时，TI需要被正常点亮。 Channel”(L/RF_Turn_Lamp_Ckt)使能时，同时读取到Dataset中“TI_POWER_Source_CFG”配置为0x01,“Channel2/3/4_usage_cfg”配置为0x04时，
(The TI需要被正常点亮。
(When the software enters Failsafe Mode and detects that only TI Power supply Channel (L/RF_Turn_Lamp_Ckt) is enabled. enabled, When the values value of TI_POWER_Source_CFG and Channel2/3/4_usage_cfg in the Dataset are set to is 0x01 and the value of Channel2/3/4_usage_cfg is 0x04,
TI needs to be lit up normally.) properly.)
返回