Redmine

2024-10-29

18:49 FORD LDM Localization 功能 #2912 (已关闭): Ford_SWER_0084_0001:Software Flashing

1.The LDM software and parameters shall be flashable via Lin bus acc. to ‘SWDL 00.06.15.002-006’.
2.LIN controller ... 希星 柯

18:35 FORD LDM Localization 功能 #2911 (已关闭): Ford_SWER_0083_0001:LIN frames Data alignment

In some LIN frames the message is distributed over more than one byte. In every case the frame shall be read as the f... 希星 柯

18:28 FORD LDM Localization 功能 #2910 (新建): Ford_SWER_0079_0002:Self-Test Command Frame Signal define

Self-Test Command Frame Signal Description is as follows:
!clipboard-202410291828-lmuhm.png!
Note:xx_EEL_LearnVfwd ... 希星 柯

18:27 FORD LDM Localization 功能 #2909 (新建): Ford_SWER_0079_0001:Self Test command Frame

Software should have internal diagnostic function, and the instruction frame format is as follows:
!clipboard-202410... 希星 柯

14:26 FORD LDM Localization 功能 #2876 (已关闭): Ford_SWER_0082_0003:LDM Diag service ID

One ID of each Node Lighting Module is allocated, but undefined and is for Supplier use. These IDs are listed in the ... 希星 柯

14:20 FORD LDM Localization 功能 #2873 (已关闭): Ford_SWER_0082_0002:LDM Service and Diagnostics Report Frame define

The following section illustrates a possible node response frame modelled after the Part Number Reporting Frame to al... 希星 柯

14:18 FORD LDM Localization 功能 #2870 (已关闭): Ford_SWER_0082_0001:LDM Diagnostic service requirement

For supplier use in development of the LDM and for analysis of warranty service return parts,the supplier should impl... 希星 柯

11:20 FORD LDM Localization 功能 #2817 (新建): Ford_SWER_0080_0003:Self-Test“Cycle all” 不报故障

LDM在执行自主测试Cycle all命令期间，如果电源有问题，LDM应该不报故障
During the execution of the Self testing cycle all command ,no fault shall... 希星 柯

11:13 FORD LDM Localization 功能 #2814 (新建): Ford_SWER_0080_0002:Self-Test “CycleAll” 指令LDM响应内容

Software shall illuminate executes the CycleAll instruction with the following sequence:
1. Channel 1 and correspond... 希星 柯

11:00 FORD LDM Localization 功能 #2802 (新建): Ford_SWER_0080_0001:Self-Test “CycleAll” Action time

LDM在接收到自主测试 "cycle all"请求后，LDM需要在3S内执行指令并完成响应
After receiving the Self test "cycle all" request, LDM needs to execut... 希星 柯